Robliepse's latest activity
-
-
Robliepse replied to the thread One white valve.update, dowel pin replaced, reinstalled new head gasket and pressur4e tested the cooling system with an auto parts store loaner test...
-
Robliepse replied to the thread One white valve.thanks for the feedback on the dowel pins. I do have one on the rear of the block but the front is missing. However it doesnt appear to...
-
Robliepse replied to the thread One white valve.Thanks, the machine shop checked the head and I need to check the block
-
Robliepse replied to the thread One white valve.Update and a couple of questions for the smart kids in the room. The head passed the mag pen and pressure testing at the machine shop...
-
Is the valve stem seal still there? Might look at the other exhaust valves to see if they were used. Some only use them on the intake...
-
Robliepse replied to the thread One white valve.I’ll take a look, engine has been running for 5+ years with no issues. Thanks for the insight.
-
Robliepse replied to the thread One white valve.white on both sides
-
Robliepse replied to the thread One white valve.dropped head off at michine shop to be tested
-
Robliepse replied to the thread One white valve.I did a dye chem test (Cantesco) on the head and cylinder and didn't see anything
-
Robliepse replied to the thread One white valve.thanks for all the insights and advice. ~ The valves and valve seats were updated when the engine was rebuilt during the build, I also...
-
Robliepse replied to the thread One white valve.fillled both sides of the valve with alcohol and both sides held it for over 5 min with no leaks
-
Robliepse replied to the thread One white valve.could it be burning oil.............
-
Robliepse replied to the thread One white valve.a friend asked if it could beoil buring and not water. Would oil cause the white valve? I'll test the valve as suggeted above and then...
-
Robliepse replied to the thread One white valve.Great advice
