Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1/2 price sale
Need to clean out parts I won't ever use , 1/2 price sale. Carbs are $50 each, the 67 # 4312 440 carb with broken off idle screw is $25 . Will leave on this site till May 20th , than will e-bay them . This way you have 1st chance .
The pins are in the small hole, but screw in . I tried phillips, regular screwdriver , and a slew of allen wrenches and nothing seems to bite . That is why I am fishing for someone who has dealt with them . You would think in 47 years , I wouldn't be the first to have remove them ( but than...
It will act same, the carb is a 1967. It fits 440 or the second carb to a 426 hemi. That is why I don't want to mess it up. Could be a popular carb to someone wanting a correct replacement # 4312s
Dave , I do much appreciate your comments, I too , thought maybe a plug could be over the pin, but cannot get a good enough look to be sure , am afraid if I drill (which will be difficult to stay on small steel pin with aluminum around it) and their isn't a plug , than I have ruined whatever...
The mixture screw has a taper , you can back the screw out about 3 turns and than it hits the pin and stops , Someone , might have been me ( had carb for about 30 years ) tried to back mixture screw on out , it broke off . I don't know why Carter did this, but has to be a way to get the pins...
I hate to disagree , but their are pins holding them in, You can see them and the one broken is out against the pin, I have several avs carbs that do not have the pins , but this one does . Give me time to find a way to enlarge picture .
trying to upload
http://media.carcrazycentral.com/data/Photo/carcrazy2_rad93CF_large.jpg click to view Small hole to left where pin is , is hard to see .
I have a afb (4312s ) that has a air idle adjustment screw broke off, I think it was tried to back all the way out, which it can't do ,due to being pinned. Now ,I need to get broken needle out . It looks like a threaded hole for the pin, but no allen wrench , Phillips ,or regular screwdriver...