Recent content by runnin74

I am looking for a Thermo Quad to rebuild. Ideally 6455S, but could also use 6488S. Thanks for looking.

Here is an NOS cruise control bottle I bought some time ago. It is like the bottle in the previous pics, but came with the pump, electrical wiring, and fluid hose.

Anyone know of a sealant you could pour in to coat all the inside then use for coolant? The crack is very hard to see when the bottle is installed.

Yea this one is not discolored. When I bought it years ago the guy said it was taken off very soon after the car was puchased and put in a closet. I presume that is why it is still the original color. For those of you who used 2 part epoxies - which one did you use?

I have this overflow bottle that is not discolored at all and since it is in good shape I'd like to use it on my car. It does have a crack at the very bottom - you can see it in the photo as a dark line near the bottom of the tank. My understanding is these bottles are polypropylene plastic. Is...

That's a bracket that sits down in the cavity of the frame rail on the right hand side of the radiator where the coolant recovery tank is located. The coolant recovery tank sits on that bracket. In the attached photo the bracket can be seen below the coolant recovery tank sitting down in the...

I'll have to dig my air cleaners out on compare them to your pics. You said you thought it was a California car? Do you have a photo of the emission decal on the hood? Also I'd like to see photos of the relay where the fusible link is attached, the bulkhead where the wiring goes through the...

Here is a question for you guys. This is a California car so I don't know if it makes a difference but my air cleaner is black. All the pics I see online its orange. Is it wrong? I believe that may be the correct air cleaner for a 74 Road Runner, although it looks a little large. Perhaps...

Yes. First thing I did to my 74 back in 77. Just get all the parts - regulator, glass, brackets, bolts from a donor satellite and swap them over. The stationary and roll down glass is different and i don't think they will interchange on the brackets that hold the glass so get the correct glass.

Thanks that's just what I needed, now I can re-wrap the harness.

I'm re-doing the engine wiring harness in my 74 Road Runner with a 360 and need to know how much of the violet temperature sending unit wire is exposed from the wrapped harness. Could someone measure the exposed length of wire for me? I've also seen some of the temperature wires with a length of...

You might want to check out this thread. http://www.forbbodiesonly.com/moparforum/showthread.php?79241-Identification-of-SB-vs-BB-K-Member-for-73-74

If that is on a 74 as your user name suggests and it is a blue wire with a white tracer then it feeds fuse cavity one. Fuse cavity one has a 20 amp fuse and protects the following: Interlock control unit Ignition run feed Brake warning lamp Power window safety relay Heated rear window...

Wow! Great pics, very detailed, nice looking engine compartment. I can see exactly what I need to know - thanks idrivemopar! Is that an new wiring harness you have there? The wires for the low pressure cut off switch on mine actually run up over the radiator support and follow the A/C...

I've been working in the engine (360) wiring harness on my 74 Road Runner. I've sorted everything out except for the section that runs along the passenger valve cover. I'd like to see pics of that area if anyone has them. That part of the harness powers the electric choke for the thermoquad...