Recent content by Schober Motorsports

WOW. That was awesome.

Fan Shroud and both radiators SOLD

I do still have the steering column. Unknown if its the non collapsible one or not... I'll let you be the judge. $150 + shipping includes the steering wheel.

Engine is sold. I have all the A/C stuff. Everything looks to be in complete shape other than the hard line from the firewall to the front condenser. That was rotted away. PM me if you are interested and I can send pictures. Already sold.

Price lowered $80... next stop is the scrap yard. Thanks!

Price lowered $400

Not a problem. My combo is kinda the best of all worlds. I'm a die hard bracket racer, so consistancy and reliablility were my two main concerns when building the car. Cam is a solid flat tappet off the shelf, Howards Cams - 280 IN/284 EXH @ .050, .659 IN/.667 EXH Lift; 108 C/L Tire size is...

That helps a ton, thank you. Did some searching with that casting number and found a similar situation with someone else who found one of these "special stamped ID pads" as his had "LANDY/40 HP" stamped, possibly a reference to Dick Landy?

Got something cool for you guys to check out today. I bought this block apart of a deal a few months ago from a gentleman who has had this block in storage for years... He purchased it from a shop in Tampa, FL I believe back in the mid 80's. Other than that it is unknown on the exact history of...

Hey guys, updates for ya. FYI, please please read everything above before sending me a message. Grille surround is sold as stated above, thanks! Here are the photos of those... I have one good 67 one, the other two look like they belong on a Plymouth maybe... I'll let you decide. $75 for the...

For the 66 ones that are behind the grille? No. For the 67 ones that are in the front bumper? Yes. I should have a few to choose from.

Haha my fault. Totally forgot to add location. Everything is located in North Port, FL. Interior was blue, alot of it was in pretty rough shape... The Florida sun is very unforgiving. I did save the inner door skins though. Seats are gone, dash is available as a complete assembly. I believe you...

I've been waiting to post to this thread since I joined this forum back when I bought the car haha. 67 Coronet, 505 BBM, Trick Flow 270s, 1050 Dominator, 13:1 Compression, Off the shelf Solid Flat Tappet, 10.5 radials. Weighs 3421 with me in it. Best run to date is 1.370 60 ft; 9.70 1/4 mile @...

1966 Coronet 4 Door Part Out Originally 318 Poly; Automatic; 8 3/4 Car The car was in an front end accident sometime in its life, previous owner put a 67 Coronet front end on it. This was an A/C car with most of the A/C equipment still intact and installed on the 318 Poly. I also have a complete...

All crankshafts have been stored inside for years. I would recommend bringing to a machine shop to be checked prior to install. All cranks are in good shape and just need to be cleaned up. Most of them have been coated with oil and were in plastic bags that disintegrated. I will ship, however...