Recent content by Smithboys69

Hello. I would like to ask if anyone has installed a new set of seatbelts from Classic Industries for a 69 charger? I have purchased a set myself. I will be attempting the headliner installation soon. The originals have a bungee strap and a snap button near the coat hook. Do these seat belts...

OK I see it now. I was looking at the wrong thing. Thank you!

This is a good reference so far. I am looking at that angled bracket and it looks like it goes to the roof and acts like a bump stop for the first headliner bow for the tensioner springs to pull against. The rest can be put to the sides and stretched forward toward the front of the car if I am...

Hello. I would like to ask if anyone has pictures of the correct installation of the rear window steel tack strips and angled bracket that goes to the headliner of a 69 charger. I am getting that there are X clips that hold this. The body shop took these out of the car and I have no reference...

Hello. I would like to ask what the correct length of steering shaft coupler is for a 69 charger is with power steering. 3.0 or 3.5? I bought the 3.5. Another question is the retaining plate vs the clip. Does the clip hold the plate tight to the rubber instead of beating down the tabs...

I checked out ECS website. I have to admit the parts look impressive also. They don't list a kit for installation that I saw, only individual parts. I simply inquired of them for a quote to see what the outcome would be for a full kit to do the car from the manifolds back. I'm not ready for...

Agreed, however sometimes the extra cost is well worth the craftsmanship of parts.

I’m liking the Gardner systems

Hello I am looking for suggestions for best concourse exhaust kits available for a 69 b body with the 383 engine? I look at Gardner exhaust and like what I see but no prices online. I look at accurate exhaust also. Looks good but not sure of best company is worth looking at. Suggestions and...

Yeah I almost bought some parts from this guy recently. I had a very sick feeling about it after I said yes and backed out of it before payment. Glad I did.

Where did You get them? Size?

This is what I have.

I wondered about that. The rubber seemed like it could fail and let the spring back through over time. Where do you get these? I did get the old spring out like it needs to be but did cut out the piece like you are showing me. Advice on location for a new one that fits?

So the correct thing to do is take the plastic out of the bracket the rod slides through, remove the old spring, add the new one then put the new rubber grommet back into the bracket for the rod to slide on correct?