Recent content by snakeoil24

sucking oil from a intake port area??

Right one is correct

1930's technology stay with mls gaskets

Yes if it's curved

Don as we both know every car that comes across to us has a different story.

0l⁰l Yup why im asking is it at cruise

Mike im impressed

First step get a co2 test kit from Amazon to check head gasket for leaks. Second if big block no more then 60 thousands clearance between impeller back side and facia of pump housing. Third you must have minimum 2/3. fan blade in some kind of shroud. Then 1/4 inch clearance max around edge of...

No it has the gear drive to contend with

Kern im sure their a good set, problem is ball bearings. A tiny sliver rides on the race. Tapered has 100 times more surface area against a film of grease and ball bearing that ride true with no torsuonal load like in electric motors are superior in a car it's not possible. Sure their are...

It's very easy when your ready. Don't beat yourself up let me know when your ready

The design of tapered bearings can last 300k thousand miles as they often do on truckers with constant lube systems. The idea of a green design was intended for short life span simple to provide a short distance straight line drive experience.. Cone bearings spread the tortional load out and...

The tapered cone bearings where designed to handle side loading for going around corners. GREEN BEARINGS ARE ONLY A TRUE STRAIGHT LINE APPLICATION!

Tapered if you want serious brutal reliability. Green bearings are tinker toys

Frames i have 25.00 each no glass