Recent content by superbird77

I can confirm it was rebuilt with a slightly bigger cam from factory. Trying to find info on it for reference. Thanks guys.

I tried the vacuum advance suggestion but no change, still does the stumble. I will check timing and some of the carb suggestions mentioned next.

Thanks for the insight guys, all is helpful. Unfortunately I had acquired this particular car last fall so I haven't had much driving time or the previous history to draw from. My other B bodies I know the details of what I setup. It runs great in all other situations, its the dang...

Thank you as well. I appreciate it.

Thank you!

I'm versed with Holley's, so possibly increasing jet size on the primaries of the AVS? I'll admit I need to learn a bit on the Carter.

Yes, I am running vacuum advance currently.

Hey all, hoping to get some help on an issue with my 70 GTX w/ 440. Stock build, Carter AVS, auto trans. The issue I am having is when driving and maintaining a consistent speed of lets say 55 mph. The engine seems to consistently stumble lightly under partial throttle only. It does not do this...

Just due to it having issues and missing some of the hard to find hoses. The compressor is clunking so a rebuild is needed and the reman ones seem to not be worth the time. My initial thought was to remove it, however i need to hunt down all the pulleys and alternator bracket. The heater box...

Hello all, looking to see if anyone knows the rundown of what is needed to swap the factory AC out and go to a non AC factory setup. The car is a 1971 Charger R/T w/ factory 440 & power steering. Right now it has the factory AC compressor w/ two belts, a power steering belt and also the fan belt...

Thank you, I googled it and found the same. That seal has more controversy than a Hillary Clinton email trial.

I thought of the pcv and breather last night as well, I removed both but it still leaked. Good looking out, sometimes it can be something that minor. Doesn't appear to be my situation but thanks for mentioning it.

If I do need a new rear seal, what brand seal and sealant does everyone recommend?

Thanks for all the help everyone. Let me ask this, to do the rear seal on this will the engine need to come out?

Is it common for a rear main seal to go so quickly? Is it just bad luck or maybe improper install?