Recent content by t67power

My 360 small block coronet.

Sounds kind of silly but you could always do some crazy paint job on. I painted a swirl on my alternators pulley and it looks like a fighter plains prop center when spinning. Even just bright silver would look cool.

I am getting a rebuilt 400 engine that was built to stock specs. It's 30 over. I am thinking of putting keith black pistons in it to get some compression, and a performance cam with the correct valve springs. I will most likely bowl blend the heads. If you run a 400 engine in a street or...

Yes i had it happen all the time and it drove me nut's. I just left mine off because i always like to check my converter bolts and make sure they are tight every once and a while. :doggie1: never really had any problems not running one.

Auto lite racing plug 3924 Buy them at advance auto for half the price of sumit or jegs. They have a cut back electrode. It's a old racers trick and it's already done for you.:grin:

If you go to mancini racing and look up the new drive shafts they sell,they tell you to have the transmission yolk out of the tail shaft one inch.

Get your slicks and go to the track and see what she's got. While your there re- way the car. I run a 67 coronet all steel with a small block 360 \ 904 \ 8 3/4 rear and she ways 3570 on the scales with out me in the car. 3700 with me in it. How is your car only weighing in at 3400...

I always lap the valves because it's so important for a good seal.

That car looks just like a car that raced in october at lebenon valley drag way ny,in the fast class.Really cool.Any of the old mopar b bodys with the dog dish hub caps and a good sounding are great.They sould all have grandma's revenge wrote on the trunk lid.

67 coronet \\\\ same as plymouth rear wheel space I have run 275\60\R15 size tires with 4 1/2 inch back spacing and it's really tight to the inside, but does not hit the inside or the out side part of the quarter panel. I run a hoosier quick time pro tire that is bigger then that, and it rubs a...

1badstroker, Cool coronet \\\ The rear is going in my 67 cuda \\ 318ci The car is turning out pretty good, but it is all the parts i have had over the years from racing my coronet small block.Trying to save money and only spend it where it's needed.

If you have run or if you do run a spool now on the street ,do you feel it's worth it.I have a complete 489 case with 4.56 gears but the spider gears are welded up.I don't think welded gears are all that safe. A spool would be the strongest and cheapest way to go. On the street it might be a...

I have a 489 case with 4.56 gears but the spider gears are were welded. Im getting a 741 case with 2.94 gears thats one wheel peel. If the sure grip can go in both cases then i sould be able to use the 741 case spider gears in the 489 case to make a 4.56 one wheel peel 8 3/4 right??? I will...

Call paw and use one of there engine kits.The pistons they sell are made by egge and thats because egge makes pistons for everyone.I was going to build a 273 and called everyone under the sun.The price is right and it's everything you need.How much power are you trying to make?I see you have a...

bead blasting a piston ruins:yes: the surface of the piston.High performance pistons are coated on the skirt to help with cylinder skuffing and wear.You now have sand paper for your motor.I made mine into ash trays.There 40 year old pistons anyways.Modern cast pistons are made way better.Have...