Recent content by terzmo

Mustangs had them also

Do you think Ronnie’s inland was pure stock?

I think 20 at idle is fine. Are you also going to a larger pan with HV pump? Just out of boredom I would swap a mechanical gauge in to compare.

Wiring diagrams can be had for free on the net.. suggest a hi flow water pump and big rad for a/c and Texas heat

Were the torsion bars adjusted to get the front end up so high and what besides possibly air shocks, raised the rearend so high?

You don’t need a temp log. Just run a digital temp gauge with a functioning stock gauge..like a 67 coronet has and you’ll find the old gauge will be right in the middle at 180…at 195 it will be at the very high of operating range..at 210 it’s pegged. And just because a 160 thermostat is used...

great pics of a parts inventory

price?

looking at a 67 Sport fury with advertised original 440 and 4 speed. On build sheet under trans it has a 3. further below, next to engine code it has 394 in trans block. Anyone know if the codes align with a 4 speed for that car and year ? thanks in advance to all. I googled it and came up with zip.

first 5 of vin ?

the rockers shown below are the one with "scratch" but is actually a crease or dent

Works for 1966 or 1967 B body. Driver's door glass and passenger vent window and frame. 100.00 for door glass 100 for vent window and frame plus shipping

Off a 66 coronet 500..will work for 67 R/T and either 66 or 67 Charger.."possibly certain 66 and 67 B bodies like GTX but not sure..check your application. This set has minor dimple and small scratches that are not seen when installed. Must be very close to see. Same shape as the pair I just...

Out of a 69 SuperBee..rear light harness with no breaks..will work for other's so check Your application. $125.00 plus ship

enterered in error