Recent content by tgc

Sorta tough to see, touching the cable with my flat blade. Comes out of the fire wall under the master cylinder closer to the fender.

Yeah, no problem. Im not home right now but i'll get you a pic

Thank you very much! Found my stock cable in a box and found the clip. Im all set now.

Putting the last details on my car and just put in the hood release cable and hood latch mechanism. It looks like there should be a clip to attach the cable to the lower part of the latch. What does it look like and where can i find one?

interesting, the description shows it as a pusher in the upper description and as a puller down in the overview. that one in a little confusing

I noticed in post #9 you linked to the SPAL electric fans that you are using. Looks like they are puller fans but you have them mounted to the front of the radiator. I understand pushers go in the front of the radiator.

Thanks, for the reply

Did you figure out a solution to your issue? I also am having fitment issues on my 71 GTX with coldcase radiator with dual electric fans with the CVF wraptor serpentine setup. Did you end up switching back to mechanical fans with pusher electric setup? Thanks for any feedback

Again, thank you. And yes, I will be doing some carful measuring to get the tires tucked in those fenders. Making my bird handle is equally important as the motor making power.

Ah, I see what you saying now! This is a good low buck option that I will look into. Thank you very much!

Dimension A as shown below is what I am looking for.

Yes, the torq thrust style wheel is what I'm looking for. I do like the raw cast look with the machined lip like e-t wheels though. I guess my biggest road block is not just picking out the wheel, but finding the brake clearance the wheel has and the space required for a stage 3 or 4 brake...

Thanks. I'll dig around on that site also. I spent some time over on protouring mopar.com but that site seems to not have much action.

I actually did do this a while ago. He told me to just ask the wheel manufacture if their wheels fit cobra breaks. For some reason I can't get anyone to give me the dimensions of the brakes.

Also, this is the look I am wanting. Just need to figure what's that largest brake I can get in the rims.