• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Torkmnstr

  1. Torkmnstr

    Window channel felt install

    Annnd done! So fun working for 4 hours to look like nothing was done . Thanks for the pointers @dadsbee. Side 2 tomorrow!
  2. Torkmnstr

    Window channel felt install

    What size is that top a pillar vent bolt? Mine is missing.
  3. Torkmnstr

    Window channel felt install

    Right! So much for not a major operation lol.
  4. Torkmnstr

    Window channel felt install

    Well first issue. These repop wings with rivets won’t vent clear the Mylar. Looks like I will have to weld them on and drill out the rivets…
  5. Torkmnstr

    Window channel felt install

    Yea H slider mylars, can you post a link to those please! Thanks.
  6. Torkmnstr

    Window channel felt install

    Well as it states I’m going to swap the felts on my 69 RR. Tried once years ago and failed miserably. Back at it again, what’s the tip here. I’ve got repo ECS glass and new wing window setups.
  7. Torkmnstr

    Charger build discussion

    Def go with with bigger bars, I ran 1.03 PST units in my RR and the car handled well. I think they kept my doors closing without subframe connectors for all those years too! Lol
  8. Torkmnstr

    Not a typical 68 Charger

    Wicked, did you make the flares?
  9. Torkmnstr

    FOR SALE 6.4 Gen3 Hemi Holley Frontrunner kit

    Low run time Holley setup, only 1,000 miles on it. Looks great but I’m rebuilding the motor with the factory setup. PS pump is setup for a remote reso. New it’s 3k out the door, $2200 OBO plus the ride.
  10. Torkmnstr

    The time has finally come‼️

    Well a bit of set back…motor blew due to a bad tune. Lean and too much timing goes kaboom…factory pistons suck.
  11. Torkmnstr

    Not a typical 68 Charger

    Nice, Def have gone up since then too...and yea a big task but he's on the down hill now!
  12. Torkmnstr

    Not a typical 68 Charger

    How much did you pick up the wrecked trackhawk for if you don’t mind me asking.
  13. Torkmnstr

    Not a typical 68 Charger

    Right on, I swapped a 6.4/T56 in my 69 RR and that was a task for me lol. My buddy is in the process of a red eye/t56 swap with the irs rear. But he welded on the front clip of a modern charger for all geometry and suspension.
  14. Torkmnstr

    Pedal Madness...adding a clutch pedal and a DBW Holley Throttle Pedal

    Nice work, I ran my Holley term x setup in the glove box as well. As for the pedal, I used the factory wedge my DBW pedal came with and mounted pretty high on the firewall.
  15. Torkmnstr

    Not a typical 68 Charger

    Just found this and drooled...er read though the entire thing. Beautiful work man, do you have a shop? Or just a home hobby expert lol.
See more
Back
Top