• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by TseTse Runner

  1. T

    Steering column fitment

    To 'dadsbee' and 'blue69runner'. I'm glad to have referenced one of your threads in my thread. Both of you make your comments so clear. I WILL continue to read and re-read both your instructions and review the pictures you have made available. Because of your comments I now have a much...
  2. T

    Steering column fitment

    I am so very thankful for the details. Your link will be invaluable !! I have already started reading and will be re-reading and re-reading and then some. I did 'in my travels' come across a b-body link which indicated that if the plastic pins have deteriorated and the steering column has...
  3. T

    Steering column fitment

    I notice that this 'joint' where the plastic pins are is part way along the main shaft of the steering column. Is the joint in the upper half of the column? Are specialty tools required to remove and reinstall the bearings and if you are going to recreate the plastic pins would it be advisable...
  4. T

    Steering column fitment

    Thanks "blue69runner" !! I recognize many of the pieces you are showing however I have not taken the column apart far enough to get to the 'spring' you mention / show. Is it located in the upper half of the column?? Is it very difficult; i.e. do I need a press to put a replacement bearing...
  5. T

    Steering column fitment

    The steering shaft / main coupler was lined up correctly with the splines on the steering gear box. The coupler on the steering column shaft came apart when I removed it and it is now lying on the floor of the car. The coupler is only held together with the metal pressed piece however in doing...
  6. T

    Steering column fitment

    Thanks for your response. I did not drop the column on the floor however I was using a deadblow hammer to try and set the connector further onto the steering box / gear box. I will check. Ps. no plastic on the floor either.
  7. T

    Steering column fitment

    I have a 1969 Road Runner and I am getting ready to reinstall the column. I am running into a problem with the length of the column as it seems to be to short BUT I did remove it, restore it and now ???????? Can anyone confirm if what the actual length(s) of the manual steering column is...
  8. T

    Factory finish of steering column and dash.

    :thankyou: John.
  9. T

    Factory finish of steering column and dash.

    You guys and gals? are incredible. This is my very first car ever and without your help I would be in over my head. BTW many people do believe that I am in over my head. God bless You. Good night.
  10. T

    Factory finish of steering column and dash.

    Thank you very much for the picture. As it is known........a picture saves a thousand words. Stay safe, be kind.
  11. T

    Factory finish of steering column and dash.

    The year of the car is 1969. What about the paint treatment on the dash ???
  12. T

    Factory finish of steering column and dash.

    I am about to spray paint my dash and steering column. I have purchased the appropriate paint however I do not know if everything gets painted. Does the entire steering column get painted ? i.e. 360 degrees ? What about the dash. Same thing for the support that holds the steering column to...
  13. T

    New / Old Member

    Well you do know what happens when a duck flies upside down ????? It quacks up !!
  14. T

    Steering column restoration - removal of the pins from the harness connector; How??

    You guys are amazingly quick in your responses. To clarify......you go in from the wire side? Are you inserting the flat tool underneath the pin in line with the wire you are trying to remove??
Back
Top