Unkle Krusty's latest activity
-
Unkle Krusty replied to the thread Hello from BC!.Gidday from Gabriola, BC We are planning on going to the all British Show May long weekend. Van Dusen Gardens Vancouver. -
Unkle Krusty replied to the thread I hate chainsaws.I bought a new Stihl about twenty years ago. 58cc or there about, 18 inch bar. Adjust the chain now and then, and sharpen it. Always...
-
Unkle Krusty replied to the thread 727 Truck Trans VS 727 HP trans differences.My camper van is a B200, which is a 3/4 ton truck I assume. Just had the 727 out and apart. But I would not know what I am looking at...
-
Unkle Krusty replied to the thread Two questions..Currently working on the valve gear noise. Might need slightly longer pushrods. Phoning CompCams. On hold at the moment. Engine is...
-
Unkle Krusty replied to the thread What is the smallest car you have owned?.I forgot to mention my Bug Eye Triumph.
-
Unkle Krusty replied to the thread What is the smallest car you have owned?.I drove an early Hillman while I was working on my 37 Ford. A bit bigger than and Austin 7, about the same size as a Thirties Morris 8...
-
Unkle Krusty replied to the thread Hemi vs. HP 727 TF.The impression I get from this thread is: I am not likely to blow up my 727 with my 318, making about 220hp and that is a guess. Too, I...
-
Unkle Krusty replied to the thread Breaking in cam and lifters.My degree wheel, is about the same size as the crank pulley. So marking the pulley is fairly easy, and degree wheels are fairly cheap.
-
Unkle Krusty replied to the thread did car manufacturers break in flat tappet cams?.I never took a car to the drag strip, but quite a few bikes to the road race track. We could never test them, before doing a lap of the...
-
Unkle Krusty replied to the thread What did you do to your Mopar today?.We just got back from the ocean. Winding road, 13 one way bridges. Will have fuel mileage and pushrod info later this week. None of the...
-
Unkle Krusty replied to the thread 318 Runs Like Sh*t When Warm.My 318 after sitting for quite a few years, got a new fuel pump, plugs and carb. I had fired the engine with the original carb, but...
-
Unkle Krusty replied to the thread What did you do to your Mopar today?.We drove a bit over 100 miles to Port Renfrew BC. Which is on the edge of the Pacific Ocean. We can see the Olympic Peninsula WA from...
-
Unkle Krusty replied to the thread Boxing in rear deck speakers ?.I do not know about that. But, what I do know is my 007 pickup, has a powered sub woofer and two big speakers behind the seats. The...
-
Unkle Krusty replied to the thread PCV valve hose goes???.I bought a new PCV valve. The rubber grommet in tne rocker cover was getting a bit hard. So I had to pound on the valve to get it in...
-
Unkle Krusty replied to the thread Torx WTF.I think there are two different sizings for the torque bolts. My 007 Chev pickup has the stupid things. And different sizes for the...