Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
for sale pushbutton heater set up $25, two dash boards one 4 sp other auto$100 each, hood spar 40 " w/emblem broken a stem $40,steering wheel horn ring $25,complete front grill center sec and end caps $125,rear shelf templit $20. two turn signel front some dents had mind fixed like new for 120...
over heating
i have a 440 30 over roller max wedge bcool raditor dual fans electric pump 35 gpm, runs hot cant go over 35 mph goes north of 200, fans sent to enguage at 160 therms 160, it seems to be the pump small ports not enough volume going to go back to mech water pump and keep the...
clips
you can buy them from r/t specialties,the tab in your photo goes in the hole and w/bent needle nose squeeze the clip together it should spread in the hole,if not tabs bend them out, or get new ones, we drilled out the tabs and heated a plactic body plug fender (well type) into the...
a question, if a fuel (elecrtic) puts out 18lbs pressure and goes to regulator to feed two fours, why would some use a by pass reg and some use dead head, how does dead head dispose of extra fuel.
i have a set one has a crease the other has a dent, they can be fixed, mine were they had holes in them came out perfect for around 130 for both, johns polishing north royalton ohio. i'll sell the pr for 50. i have other spare parts from my 63 ply bel for sale
i have a set that need creases taken out, had mine done at johns polishing in n royalton ohio came out like new mine had holes in them, about 100 to fix, let me know