Recent content by What’s up dock

I had the same problem. I ran dedicated ground wires to each have of the tail light housings to be sure, because of the fresh paint. I do that on all cars anyway, but it turned out to be the resistance wire in the left side of the trunk.

I believe all of the aftermarket items are set up for 66-70, so the bolt pattern is different. Easy to remedy, re-drill the outer holes. You're Qa1 front will re-position the engine to the 66-70 specs, so that will help you. I'd think you could install this, then the other holley stuff would...

Thanks! Keep them coming.

Just wondering what the combo's are for a 72 gtx. Going with steel mopar rallye wheels. I was leaning towards 15x6 in the front, 15x7 rear. In other body styles, I've run a 235/60 up front, or a 225/70. Rears 255/60 or 275/60. Whatcha running?

As 68jim said, no blocks were cast in 67. Supposedly, 10/31/66 was the last 1966 batch cast, then not cast again until 4/68. 340 T/A blocks were the same, only one or two casting dates. So, with that said, a late 66 block would be correct for all 67 cars.

You need to shop around. It sounds like you are able to pull and re-install, so taking a 727 to someone should be much cheaper anyway. 3 grand is crazy for a non-race 727 rebuild. If you do get it rebuilt, replace the convertor(remanufactured) and flush the cooling lines! Take time to adjust...

I believe it is old style 35mm film.

I'm still digging through my boxes, but not yet.

Complete and in excellent shape, never used, 1968, 1969, and 1971. They have the flims, records, and flyers for each section. Slight staining on one corner of two boxes. $200 each, plus actual shipping. They will be well packed. Pm here please

Here is a list: Dodge, 66, 67 (qty 2), 68(pending), 69(pending), 70 (qty 4), 72 Plymouth, 68(pending),69, 71, 72 (qty 3), 73 (qty 2) All are nice and complete, except 1. One of the 70 dodge pages has a name written on it, and the cover page for the colors is gone. See pic. Discount on that...

Sorry, I see it now

Where ya located?

I've been using the Jegs equivalent, more than likely made by Lokar, but half price. These come in regular braided also. Today is the last day of the this sale, so use the code at the top of the page. Oh hell....I sound like an infomercial! JEGS 157034: Transmission Kickdown Cable Kit...

Well, I haven't picked out heads yet. 15 years ago, I would have picked up a set of cnc ported edelbrocks. Today, no cnc edelbrocks to be found, but many other choices. Because of the stroke, it leaves me needing a large cc volume dish piston, and a larger cc volume chambered head. I don't...

Well, this build is for a good friend. He's older, not going to want to lash valves. But I agree, a nice solid roller would be great for most applications like this.