Recent content by wideload714

Great job ! I thought the black plastic was molded onto the metal, but after looking closer with a good light I found out you were right. Thanks for your help

Thanks for the idea, but I think Oldbee was right.

I'm getting ready to put my dash cluster back in my 68 Super Bee, and I can't figure out a wire in my dash harness. My dash came with a clock, but I changed to a repop tach. The wire I need help with is the one on the right side of the photo, a black wire with a flat spade that gets bolted on...

I am doing my first mopar engine. The connecting rods have a channel machined into it to squirt oil, but the new bushing that I received don't have a notch to match up with the " v " notch in the rod. I've tried to find pictures of bushings from different manufacturers, but they all seem like...

If you want to stay original , just do some searching around on Ebay. I bought a case of 4000 and a case of 4001 and I paid about $ 40.00 for each case . That comes out to be about $3.33 a bulb.

No longer needed

I'm interested. I sent you a message Darwin

Looking for a trunk lid for a 68 Coronet. I'm not looking for perfect, but one that can be used/fixed for driver car. Let me know what you've got. I'm a truck driver so I might not be able to reply instantly, but I will get back to you. Thanks Darwin

My 68 Super Bee never had a factory tach. I've got a tach to put into the dash and the wire to connect it, but I don't know where it came thru the firewall. Do I have to drill a hole for the grommet or where is it routed? I looked in the FSM but could not find it. Thanks Darwin

I went back to the website and it's not the one I was thinking of. There is a restoration service on Ebay that shows a wire harness with a wire that is not taped in, but after looking closer at the picture it's bigger than the one I have. Thanks for the reply

Here is a picture with a quarter for reference. A thin solid wire ( not standed ) with red insulation. The M&H website ( the people who make wire harnesses for Year One ) shows a wire harness with a thin wire, but I can't tell where it goes.

I'm trying to redo the bulkhead connector on my 68 Super Bee. The old connector had a solid ,thin wire that was about 30awg. It fell off and I can't seem to find what this was for. Can anybody help me on this ?

I'm looking for the two " bolts " that mount into the dash by the defroster vents and hold the speaker frame to the dash. They are mounted in a tab that slides into the dash. My painter lost them when he took the dash out. If you have 'em, let me know what you want for them. Thanks

Thanks for the help.

My bodyman removed the door locks from my 68 Super Bee when he painted it, and I don't know how to put them back in. I have the FSM but it's not clear. Do they just go straight in with the rod into the little hole on the back of the tumbler ? Which way should the lever on the back of the...