• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

wilky70's latest activity

  • W
    wilky70 replied to the thread wheel trims.
    I purchased a set a few months ago from Summit. They were terrible quality. The SS was a brown shade not silver like it should be. I...
  • W
    wilky70 replied to the thread 1970 Disc brakes.
    Thank you. I purchased the pads from a local company that rebuilds calipers and M/C's. They are organic pads that he had sitting on the...
  • W
    wilky70 reacted to MoparLeo's post in the thread 1970 Disc brakes with
    Agree
    .
    Excellent work. I would use bonded lining though,Riveted pads and shoes will crack at the rivet holes. Just make sure that the pins are...
  • W
    wilky70 posted the thread 1970 Disc brakes in Brakes, Steering & Suspension.
    I'm rebuilding the disc brakes on my 1970 Superbird. The only hardware that was left were the worn out pins. I purchased this kit with...
    • disc brakes 1.JPG
    • Disc brakes 2.JPG
    • Disc brakes 3.JPG
  • W
    wilky70 replied to the thread rotor/drum finish.
    I will paint them with "cast iron" spray paint. I would like them to look correct and not rust. Not a show car but I still would like to...
  • W
    wilky70 replied to the thread rotor/drum finish.
    The same for rotors, calipers and drums?
  • W
    wilky70 posted the thread rotor/drum finish in Brakes, Steering & Suspension.
    What color or finish should be used on the front rotors and rear brake drums on a Superbird? Also color/finish for calipers. Thank you...
  • W
    wilky70 replied to the thread replacing master cylinder.
    Thank you, this is exactly the issue I'm dealing with. It should have been an easy bolt off/on replacement but...
  • W
    wilky70 posted the thread replacing master cylinder in Brakes, Steering & Suspension.
    I'm replacing the master cylinder on my 1970 Superbird. The piston on the old master cylinder was flush with the mounting flange. On the...
    • master cyl.JPG
  • W
    wilky70 replied to the thread Superbird Master Cyl.
    I will check it tonight and see if it has a Bendix casting number on it. We have a brake rebuilder nearby that can sleeve it if I have to.
  • W
    wilky70 posted the thread Superbird Master Cyl in Brakes, Steering & Suspension.
    I need to replace the master cylinder on my Superbird. It has right facing ports. Does anyone make a replacement or will I need to have...
Show older items
Back
Top