Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It’s a napa battery and regulator. It’s the 1v drop at the feed causing it to over charge by a volt. I’m just not sure how to fix whatever is causing it
It is freshly assembled after a summer of resto. All grounds have been cleaned and checked. There’s a .2v difference between the measurements on either side of the feed wire at the bulkhead.
reassembled my 73 charger and have a over charging problem. It’s around 15v. I have a 1.08v drop at the blue feed at the outside bulkhead. And .8 on the inside of the bulkhead. .16v at the red on harness side and .18v at column side. .47v at the blue column side and .49 on the harness side. Not...