• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

ynst's latest activity

  • ynst
    ynst replied to the thread Daytime running lights..
    Daytime running lights also operated at a lower intensity than direct-fed headlights. DRT systems did NOT also turn on the tail lights...
    • 1750523156259.png
  • ynst
    ynst replied to the thread Daytime running lights..
    Using your vehicle lights to see and be seen...
    • automatic_headligths2.jpg
    • front_fog_lights1.jpg
    • front_fog_lights2.jpg
    • rear_fog_lights1.jpg
    • rear_fog_lights2.jpg
    • marking_lights1.jpg
    • marking_lights2.jpg
    • dl_doc_icon.png
    • automatic_headligths1.jpg
    • automatic_upper_beam2.jpg
    • master_light1.jpg
    • daytime_running1.jpg
    • daytime_running2.jpg
    • headlight_lower_beam1.jpg
    • headlight_lower_beam2.jpg
    • headlight_upper_beam1.jpg
    • headlight_upper_beam2.jpg
    • automatic_upper_beam1.jpg
  • ynst
    ynst replied to the thread Lights Dim at Idle.
    I'd vote for diodes as well. 90% of the alternator low output problems I've encountered in the last 50-plus years have been diode issues.
  • ynst
    ynst reacted to RJRENTON's post in the thread Lights Dim at Idle with
    Agree
    .
    Your rebuilder must have installed a new STATOR windings. The rotor supplies the power to the stator windings which are AC, which then...
  • ynst
    ynst replied to the thread Cutting tool lube.
    Thanks. Another cutting lube I use is Blair's lube stick for their Rota-Broach cutters. I need it because I have 5 sets of various...
    • 1748185880744.png
  • ynst
    ynst replied to the thread Cutting tool lube.
    Amazon.com
    • 1748098172779.png
  • ynst
    ynst replied to the thread Transmission Carnage.
    Check the end play on the cluster gear. The front thrust washer is probably missing or worn and the cluster was moving forward and you...
  • ynst
    Factory undercoating did NOT cover the entire underside of the vehicle. The factory undercoating was applied by two floor techs, one on...
    • 1747501243715.png
  • ynst
    '68 GTX, 440, 4 speed, wide radiator, oil changes every 3000 miles since new. NEVER had an issue changing the oil filter from under the...
Back
Top