• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by ywca

  1. Y

    Hello from Saskatchewan!

    Welcome from NestorFalls, Ontario I also own a 67 GTX
  2. Y

    FOR SALE 68-70 B Body Standard Dash Cluster Printed Circuit Board Original Nice

    I will take one PM me for shipping information thanks. Perry.
  3. Y

    Hello From Ontario

    Welcome from Nestor Falls, Ontario
  4. Y

    WTB 67 GTX, inner fender

    4 access hole covers and bolts
  5. Y

    67. Gtx 10 inch rotors will not tighten up.

    I finally got the callipers to be centred on the rotors. It was a bear. I didn’t notice this problem earlier which was the rotor had a step before the flat surface, preventing the calliper to be square ,you’ll see in the photo the part that I had to machine. I added 1/8 to the inner bearing race...
  6. Y

    67. Gtx 10 inch rotors will not tighten up.

    These are original Bendix callipers that have been rebuilt. They bolt on the knuckle , the rotor has to fit perfect for the calliper to fit right over the rotor. I received these parts from my brother that has two GTX that went to the bigger brakes. He also had a bunch of used stuff and he just...
  7. Y

    67. Gtx 10 inch rotors will not tighten up.

    What’s the thought of putting a 1/8 spacer on the spindle, bolting up the callipers everything lines up perfect,
  8. Y

    67. Gtx 10 inch rotors will not tighten up.

  9. Y

    67. Gtx 10 inch rotors will not tighten up.

    I think he might’ve shimed the race if their rotors were getting thin, putting a shim behind the inner race would bring the rotor in board
  10. Y

    67. Gtx 10 inch rotors will not tighten up.

  11. Y

    67. Gtx 10 inch rotors will not tighten up.

    I’m putting back the original brakes on my 67 convertible, I got the parts from my brother’s 68 GTX the rotors and calipers. The callipers were rebuilt by John Stuart and I’m machined the rotors. When I got the rotors, there was a 1/8 shim underneath the inner bearing race. I removed the shim...
  12. Y

    67. GTX. Rotor problems.|

    Putting original brakes back on GTX, got rotors and callipers and spindles from my brother’s 68 gtx the calipers were rebuilt and I machined the rotors. When I got the rotors and removed the bearing races, there was 1/8 shim under the inner bearing race which I found strange. note that the...
  13. Y

    Correct Paint Colors '69 Suspension Parts

  14. Y

    Hello from Canada

    Welcome from Northwestern Ontario, good luck with your project
  15. Y

    Newbie From Canada

    Welcome from Northwestern Ontario, nice ride
See more
Back
Top