mean_maverick
Well-Known Member
Contact seller
-NEW 66-70 Dodge B-body gas tan. purchased new for a project and just sold it. paid over $350 for it from Advance, Asking $250 and I'll throw in the new sending unit I bought as well
(Coronet, Roadrunner, Superbee, Satellite, Charger, etc..)
-MOPAR Performance black finned valve covers for Big Block engines (383, 400, 413, 440) $100
-set of used Hooker brand headers for a big block $150
-set of engine adapters to put a BB mopar engine in an A-body (duster, dart, etc..) $100 for the set -SOLD-
-also have what's left of a '68 Coronet...has good frame rails, most of the floors are good, new trunk pan installed, and quarters are already repaired. this would be good to finish cutting up for the good sheetmetal out of it. $500 (the quarters are worth that alone)
-new rebuilt electronic distributor for a 383/400 engine. paid about $80 from Advance, selling for $50
-Good set of Big block "452" heads, removed from running engine so you should be able to bolt them on and go $150 for both
-Good set of '68 model "906" heads, removed many yrs ago $350/set
-Extra complete dash assembly from '68 Coronet
-Big block K-member removed from a '68 Superbee
-Misc nuts/bolts, interior peices, seat belts, etc.
-'68 Big block 904 transmission, unknown condition $150
-383 Hi-po oil pan with factory built in baffle, removed from '68 Superbee
-'68 383 complete short block (block is busted)
-'68-'70 B-body 8 3/4 rear end housing, axles, and brakes (no center section) $250
last try on some of these parts before ebay and the scrap yard. will cut whatever u might want from the car
will also make a pkg deal if u buy everything listed!
(Coronet, Roadrunner, Superbee, Satellite, Charger, etc..)
-MOPAR Performance black finned valve covers for Big Block engines (383, 400, 413, 440) $100
-set of used Hooker brand headers for a big block $150
-set of engine adapters to put a BB mopar engine in an A-body (duster, dart, etc..) $100 for the set -SOLD-
-also have what's left of a '68 Coronet...has good frame rails, most of the floors are good, new trunk pan installed, and quarters are already repaired. this would be good to finish cutting up for the good sheetmetal out of it. $500 (the quarters are worth that alone)
-new rebuilt electronic distributor for a 383/400 engine. paid about $80 from Advance, selling for $50
-Good set of Big block "452" heads, removed from running engine so you should be able to bolt them on and go $150 for both
-Good set of '68 model "906" heads, removed many yrs ago $350/set
-Extra complete dash assembly from '68 Coronet
-Big block K-member removed from a '68 Superbee
-Misc nuts/bolts, interior peices, seat belts, etc.
-'68 Big block 904 transmission, unknown condition $150
-383 Hi-po oil pan with factory built in baffle, removed from '68 Superbee
-'68 383 complete short block (block is busted)
-'68-'70 B-body 8 3/4 rear end housing, axles, and brakes (no center section) $250
last try on some of these parts before ebay and the scrap yard. will cut whatever u might want from the car
will also make a pkg deal if u buy everything listed!