• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1964 Dodge Polara

Status
Not open for further replies.

DennisH

Well-Known Member
Local time
1:28 PM
Joined
Mar 24, 2011
Messages
77
Reaction score
5
Location
Westland, Mi
Feedback: 0 / 0 / 0
Contact seller
P6220067.JPGimage.jpgimage.jpgimage.jpg

I just can't get focused and am tired of staring at it, so it's time for it to go. I thought I wanted to race NSS, but now I'm not sure.

440, pushbutton 727, later style 8 3/4. Either 3.91 or 4.10 SG.

The engine is a 74 or 75 block with ported 452 heads. .590 solid cam. 12.5:1 compression. Torker intake with a 950 (?) HP carb. It has an old set of CPPA headers with flowmasters to the axle. The engine only has a few thousand miles on it.

The body is very solid with a few small bubbles. Paint is not original but is a good 10 footer and could probably be cleaned up and look a lot better.

The car is very strong and sounds great. It is streetable and can run on a mix of race and pump gas.

11,000 or close offer. There is a guy who has transported many Mopars local to me, so transport costs could probably be minimized. I might be able to help with those costs too.

Come and see it in person. If you are not local, there are plenty of Mopar guys in the Detroit area, have one of them you trust come and look at it.

Clean Michigan title in my name.

I would like it gone by then, but I may bring it to Norwalk in Sept if I still have it.

Dennis
 
..................
 
Last edited by a moderator:
If someone wanted to race in NSS, I also have an A&A crossram intake package and two rebuilt 600 Edelbrock carbs for extra $$. The intake and carbs are not available separately until the car sells.

Dennis
 
I know it's a long shot, but I will look at a very partial trade of a 61/62 Lancer sedan.

Dennis
 
Sir! Could you email me your phone so I can ask about particulars on
your car. I am a previous owner of car few years back and I am in
central Mi. Thanks! D.Dog
 
Great car. Wish you were on this side of the border we would be working out a deal. Never see deals like this up here.

Nice job on the car.
 
10k bottom line or 12k with the intake and carb stuff. If it's not gone by winter I'll pull the engine to paint it and make it look nicer and try again in the spring for more $$.

Dennis
 
Will consider reasonable offers for the car or the car and intake package.

Dennis
 
12k for the car and intake/carbs.

10k for just the car, turnkey.

8k for the car minus the engine only. Trans and headers stay with the car.

Dennis
 
How much for the intake package?
 
Not selling the intake package until the car sells.

REASONABLE offers will be listened to for the car, either turnkey or a roller.

Dennis
 
Status
Not open for further replies.
Auto Transport Service
Back
Top