cdr
Well-Known Member
the pins are good, but the flip type lock hasp,rings, are junk, unless they quit making them in chincheena out of pot metal.
Fiberglass hood pins
- Thread starter bobtile
- Start date
66Satellite47
Well-Known Member
I now use the torsion ring style, Jegs or Summit? Work fine. Years ago used flat aluminum Dzus on my Arrow. Had 6 on the hood, 147 MPH. Had the modified screw driver handy or even a quarter.
glassman
Well-Known Member
I have them on my Cuda also. Yes they will be changed also to some pins I got from ebay
67 coronet
Well-Known Member
i use dzus fasteners. i like the flush mount and you can paint them to match the hood. as said before, a quarter can open them, so no need for special tool.
gtxracer
Well-Known Member
- Local time
- 9:49 PM
- Joined
- Nov 24, 2011
- Messages
- 656
- Reaction score
- 508
- Location
- Lake Stevens, Washington
I use and have used the Dzus fasteners on my GTX forever. They take a little time and measuring but they work and hold just fine.
Bob
Bob
Geri
Deceased, But not forgotton
how many times have I said I want this car- and why aren't you listening? (love the '63's)
I plan on installing the safety latch on my fiberglass hood just for piece of mind to go along with the A12 hood pins. There's a lot of stress up there at high speeds.
383man
Well-Known Member
Moparmatt72
Well-Known Member
I have these on my a body, course I wanted something lockable since it's also a street car. Aerolatch summit sells them, have both with locks and with out.
Similar threads
