Need a photo of the front of the wing window frame that shows the placement of the weather strip that is glued on.
Thanks, I have that, Still would like to see a real photo.That is shown in the service manual, under body sealing.
You can get a copy at MyMopar.
Thanks, I have that, Still would like to see a real photo.
Thanks for the post. But I am looking for the front edge of the wing window frame in the door , not the body.I posted the section from my '62 build. Yours might be a little different but the idea is the same. I show in my thread to find the center of your seal (where the two different profiles are) for best results.
https://www.forbbodiesonly.com/moparforum/threads/taking-up-new-residence.114133/page-24
My bad. If anything I'll give your thread a bump.Thanks for the post. But I am looking for the front edge of the wing window frame in the door , not the body.
Can't say for sure, but of course there's probably minor differences. A screw here, or there, about it. Otherwise, pretty much the same, how that seal goes in.It is all slightly different on a 65 HT than on the 62...
My bad, too! Think your right, skicker, after re-reading the post.The one that would seal from the vent window assembly to the A pillar post...