pro-streeter
Well-Known Member
Any recommendations for aftermarket upper control arms 69 Road Runner
1969 b body upper control arm recommended
- Thread starter pro-streeter
- Start date
70chall440
Well-Known Member
- Local time
- 8:19 PM
- Joined
- Feb 11, 2018
- Messages
- 4,579
- Reaction score
- 6,344
- Location
- Yelm, Washington
Firm Feel tubular
Sascha
Well-Known Member
QA1
I gotta ask what makes these better than the factory ones?
Most aftermarket will have improved geometry and won't be rusted away to nothing.
https://www.qa1.net/mopar-control-arms they say stronger,lighter and increase caster 3 degrees
67belvedere/225
Well-Known Member
i used firm feel . make sure you use good rubber lubricant on those bushing when you install them , those urathane tend to get squeaky
and also glue or use silicone to keep the boot stuck to the ball joint. so when you grease them they dot pop off
and also glue or use silicone to keep the boot stuck to the ball joint. so when you grease them they dot pop off
pro-streeter
Well-Known Member
Good tips thank you
Similar threads
