• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Looking for 67 Coronet RT Rocker Molding set

Status
Not open for further replies.
D

Dallas67RT

Active Member
Local time
6:06 AM
Joined
Dec 23, 2023
Messages
37
Reaction score
27
Location
Dallas
Feedback: 0 / 0 / 0
If anyone knows of a reasonably priced set of used Rocker Moldings for a 67 R/T, let me know & how much. Russell
 
I know at one time classic industries sold new reproduction ones ?
 
Thanks. They do but they are pretty expensive. All my trim isn't perfect so a used set would be fine.
 
'66 Coronet 500, '66-'67 Charger are all the same as '67 R/T.
 
I do have a friend that has a set off a 66 Charger but not the best shape. Think he wants 50$ but again shipping.....??? and in a long tube.
 
Thank you all for the ideas & options. Since the paint and body guy has some other things to go back and do, I'm just going to have him smooth out the lower rocker sections and paint. I know it's not 100% stock not having the rocker trim but it looks OK to me.
 
Thank you. Taking it back to the paint shop tomorrow for a few things and I've decided I'll just have that smoothed out and filled in under the doors. Yeah it's not 100% stock but it looks OK to me if they're not on there.
 
That's fine. Your car. Make it your style. However, I would leave the holes for a while. You may change your mind. I have had several friends think the same as you then decide to go with the rocker mouldings.
 
I think the moldings really work on these cars. There is so little side "flash" on the R/T, other than the door handles. It ties the wheel well moldings together. Mine:

DSCF0030.JPG


DSCF0025.JPG
 
Dave6T4 said:
I think the moldings really work on these cars. There is so little side "flash" on the R/T, other than the door handles. It ties the wheel well moldings together. Mine:

View attachment 1852099

View attachment 1852100
Click to expand...


Agree, and the only other side bling there was is the quarter panel mouldings that would go in the scalloped sections behind the door. In the 1966 books as an option but rarely seen on the Charger.

1747243294712.png
 
Thank you for the info and images. They look good that's for sure.
 
I think those quarter panel moldings were standard trim on 1966 Coronet 500. Never available on Charger or '67's.
 
Dave6T4 said:
I think those quarter panel moldings were standard trim on 1966 Coronet 500. Never available on Charger or '67's.
Click to expand...
They were for the 66 Chargers but usually added on at the dealership. Can see them in the 1966 Hemi and Charger supplement manual book.

1747247019393.png
 
Status
Not open for further replies.

Similar threads

1Tlew0
  • Locked
WTB 68-70 Charger/Coronet Rocker Molding
Replies
2
Views
401
QuickBpBp
QuickBpBp
dan juhasz
  • Locked
FOUND Clip for rocker panel molding
Replies
0
Views
403
dan juhasz
dan juhasz
P
  • Locked
WTB WTB 66-67 Charger lower grille molding
Replies
3
Views
567
RedBeard
RedBeard
C
  • Locked
WTB 67 Coronet wiring harness
Replies
6
Views
528
chignikred
C
R
  • Locked
WTB 67 coronet r/t inner door badges
Replies
2
Views
314
rt67440
R
Auto Transport Service
Back
Top