Separate names with a comma.
Congrats! Do yourself a favor and add a timed solenoid moisture drain to the tank. Mike
It's beginning to look like a nudist camp! Mike
My first engine rebuild was a 332 Ford school bus motor. I was 15 and the engine was only one year old. It wasn't big enough for the loads. Second...
You're going to need one of those robot vacuums to clean all that area! Mike
I use my Chinese/ENCO 12x36 a lot. I got a smoking deal when I bought it. I don't want to go back to "no lathe". Mike[ATTACH]
Moving along at a pretty good clip now and looking nice. Mike
If you were looking for help/advice I recommend the Hobby Machinist forum for lathe knowledge. Mike
Wow! That would be enough to stop most of us ordinary mortals! Mike
Take the battery home every day and recharge it over night. Mike
Fill that with beer and lock it. Gotta keep the kids out of your stash! Mike
It's about time for you to get some grease under your fingernails! Mike
Great idea to paint your mailbox so the kids won't miss it driving by! Mike
Kerosene is lighter than water so the water sits in the bottom, and rust never sleeps! Mike
I never wore any gloves for 50 years and I spent tons of hours in solvent tanks. Got these last year, seem OK but only use for large parts (trans...
Yes, a line mechanic. Worked in 4 different Dodge dealerships from 71-78. Mike
My tank holds 35+ gallons. It is a commercial unit my dad got from the local Dodge dealer but, later downsized his business and I got it. I worked...
The Garage Journal Check out MP&C thread in "fabrication". The guy is a genius when it comes to welding sheet metal and fabbing "unobtainum"...
I have Safety Kleen service my tank about every ten years now days. I don't rebuild nearly as many transmissions as I used to. Mike
Carl, Just read the whole thread, tons of work but, she's looking good! How did the polished concrete floor turn into epoxy? Great talking with...
I recommend 16 GA carbon steel. I have built 4 benches with steel tops. Have the front and rear edges bent at 90* up and down. Also consider using...
