Separate names with a comma.
The Dynomax superturbo mufflers are fairly quiet and flow pretty good. Also not that expensive. A stock replacement type muffler will be fairly...
I though the passenger side of a tri-y was supposed to be 2&4 connected, and then 6&8 connected into "Y"s?
I have the 3" "H" pipe crossover version on the '71 Charger and it fits good. No issues with it. I have the 2.5" "X" pipe on my '69 Coronet...
I have the TTI X-pipe on the Convertible. I added flanges between the muffler and tailpipe to make it easy to drop the center section of the...
The '71 Charger has the TTI 3" H-pipe system with the Super turbo mufflers. It sounds good, and quieter than most other performance mufflers, but...
On my '69 Coronet R/T Convertible, I used the same 1-7/8" headers and the 2.5" "X" pipe exhaust, but with stainless Walker Quiet-Flow Mufflers (I...
Back around 1990, I bought Blackjack alumacoat headers for a 383. Could not get them to seal (or that's what I thought?) After taking them off...
Done several with floor jacks when I was younger, but it is harder to get the welder positioned. They worked, but did not look pretty. Had a...
It depends on your skill level and the tools you have. It is pretty difficult to fab an exhaust without a lift. Just not much room working with...
I guess it has been awhile since I looked at the cost of the TTI exhaust (and headers.) Prices sure have gone up in the last 5 or so years. I...
Here is what I am thinking on the build. Guessing your using stock 3.75" stroke crank, and stock rods with ARP rod bolts, and maybe 0.030"...
Sounds like the manifolds would be fine for what your doing. You can always throw headers on it at a later date if you need more power.
Been a long time, but I thought the PH43 was the short version filter of the PH8A? https://www.summitracing.com/parts/frm-ph43I haven't looked...
Those aluminum ones work better than many others I have used, but you need to be careful handling them as it is easy to bend and seperate the...
What kind of power does the engine make? Likely don't need 2" unless making 600+ HP? Have the TTI 1-7/8 on the 440 stroker in the Coronet...
The Dynomax super turbo is one of the quietest while still out flowing many other mufflers, but it is not OEM quiet. I din't know of any quiet 3"...
