Separate names with a comma.
Try to get a clutch type fan (it will free up quite a bit of horse power), shroud, and a radiator to clear the fan and cool properly. There are...
Yes. Their design. By the way, it was engineered to cool my 765 horsepower.
As I have stated in previous posts here, I purchased a Wizard radiator (22") with 4 Spal fans (staged) to cool my 540 Indy motor with A/C. Wizard...
I had Wizard build me a 22" with fans that they told me would cool my 540 with A/C. Beautiful but pricey.
Jegs and Summit both have economically priced generic bottles.
I always try to help!
They are going to be staged in pairs. I have to cool 765 horses with that narrow 22" width and I have A/C. Wizard designed the capacity.
My Wizard is beautiful. It was designed to cool a 540 wedge. 22" wide.
Gates Power Grips are great. One time use as they have to be cut off (soldering gun will melt also). I had a new t-stat housing and a new radiator...
I find it disgusting that people keep finding new fastener designs just to profit from sales to mechanics. I do like torx for small screws as they...
You will need a way to control the compressor. It must cycle on and off to control the evaporator temperature (keep it from freezing up). The...
That cap could be neatly removed in a lathe.
American brand autos have been using metric fasteners for like 20 years now.
Man, that would be cool if the T-stat would maintain the engine coolant temperature! But, no the T-stat opens at its rated temperature. It's a...
And a fitting in the intake manifold with a small nipple for the supply.
Well, there is more to the story: I ordered wedge motor mounts but, it turns out Indy uses Hemi mounts on their Max block so I cut off the wedge...
Alterkation front suspension. But, to clarify, my engine is set back as far as practical with stock firewall. To do that I had to replace the...
I bought this 22" for my 65 Belvedere from Wizard. I told them the horse power and they designed a system to cool. I hope it works! Might have the...
Does your electric fan shroud have the by-pass flaps I have seen on other shrouds?
I'm using a 1968 Dodge Monoco 26" in my OEM slant six 1966 station wagon w/493. Using the shroud too.