Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does the roller on the horn contact run freely? Maybe a small amount of di-electric grease will help it stay nice for longer.
Unless it is shadows.....looks like a small flat spot on top of the roller to me.
Hm, could that small wear really make that noise?
Well, ive got a new adaptor on the shelf so will try that one.
No, solder joint runs free. No problem there.
I recently swapped out the Bosch inline on the chassis rail to an in-tank Holley pump. I can hardly hear the in-tank pump. I don't mind a hint of sound, but anything on the chassis rail will be annoying. I am very happy with my swap.
BTW ..... Warning to everyone...stay well clear of the...
The BEST pump is the Carter Electric pump, either 72 or 100 GPH versions. It is the only external pump that I am aware of that has the fuel circulating through the electrical section. This does a number of things: lubes the bearings, cools the motor & eliminates the seal between the elec & pump...
What intake / carb? and has the distributor be re-curved?
A good tune can make a difference if everything is still stock.
If the engine has the stock valve springs, I would change them, or at least check their pressures / adjust install height if needed (and if it would work?)
I would use the...
If you are looking for something that is non-hazardous.....try some good old-fashioned steam from a boiling kettle.
Now I suppose OSHA will get involved as you get 3rd degree burns on your hand.....but at least the burns won't be cancer-causing. :rolleyes:
It was I had on hand, and several components, mostly kerosene.
Link to the MSDS:
https://www.hoppes.com/on/demandware.static/-/Library-Sites-HuntShootAccessoriesSharedLibrary/default/dwfbc7ef45/productPdfFiles/hoppesPdf/sds/04e3a446-2860-4fdd-9e91-49ea662e5830.pdf
Probably, but the other day I went for a new shovel for my garden and paid twice as much for one made in Canada instead of opting for the Chinese alternative.
I had issues with the Edelbrock Quiet-flo pump staying primed. Maybe my new pump was defective, but not impressed with the Edelbrock pump.
The Mallory 250 pump is a good pump, and for its size is quieter than many other pumps like the Hollys, but it is not quiet.
For quiet, an in-tank Walbro...
You can actually see the wear already on the inside of the copper disc...
Is the head of that solder joint contacting anything like the red terminal point or the plastic of the turn-cancel mechanism?
The 440 engine has come in numerous bodies and configurations, so it may be a stretch finding a set that will fit your exect 440 configuration.
These cut-to-fit sets are pretty decent. You usually only cut one end, the distributor end. By mixing around the wires (of varying lengths) in the...