Separate names with a comma.
These are Dynomax Super turbos 2 1/2" TTI pipes on a 440 with a .528 camshaft stock manifolds
Found a few more.[ATTACH] [ATTACH] [ATTACH]
Behind the manifold on the valley pan hold downs. They sell a bracket.[ATTACH]
Summer 1976. B7 white top. pretty car. Vitar transmission with 3000 stall[ATTACH] [ATTACH]
I did the shaft bushings on the older set. On the newer set the shafts were still pretty tight.
I have 12lbs vacumn, fluctuating to 14. running the Mopar .528 -284. I never checked the power brake connection.
Im guessing the center carb is the problem
Had an older set of carbs on my motor. Idled good, just ran a tad rich. I decided to rebuild another set. I had them boiled out and plated and...
Heres the tag:29 =Gate
208837 = sequence number.All are related to the production of the body in white.9=1969 model year
A = Lynch...
additional pics[ATTACH] [ATTACH] [ATTACH]
Not running, motor spins free
Ive been toying with the idea of selling this project. Looking for a ballpark figure where to start. Needs front floor, lower quarters, full trunk...
b4 bucket seats
w6 built for Canada
25 drip rail moldings
30 body belt moldings
78 wheel lip moldings
A1 2:76 rear ratio
[ATTACH] Factory race hemis
[ATTACH] [ATTACH] [ATTACH]
This was on Moparts[ATTACH]Has a floor shift and a column shift!!
This was one of the pictures from the ad.
[ATTACH]Has a floor shift and a column shift!!
Check out the original steering wheels in the B&W photo!!
Dodge simulator! could use those steering wheels!