Separate names with a comma.
Wrong forum to debate this.
Is it a fast ratio arm by chance? They are longer.
any of these?http://www.rtspecialties.net/proddetail.php?prod=1000234http://www.rtspecialties.net/proddetail.php?prod=6026450
I used the PST upper arms on my 68 charger. I had to do some minor grinding in order to make them not hit the frame at full drop. No 2 cars are...
Does the cam have a number on it that says it’s for a big block mopar? I’d say it’s the wrong cam.
@417guydid you solve the squeak issue?
MOOG. Try to get USA made ones, they are still out there. Might have to order like 10 and sort through the boxes and return the rest. I’ve heard...
Clutch adjusted so that the throw out bearing fully disengages and isn’t still spinning?
Took my oldest boy to the cemetery this morning to help put flags up on all the veterans graves.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
Good run there on the last few pages. Thank you! :thumbsup::thumbsup:
Well I think this is the issue. In order to put it in parallel the motor is supposed to be at TDC. Sounds like you are off a couple teeth on the...
Did the drive shaft get dropped back in parallel with the cam cause that’s how it was or just dropped back in that way? Did you have it set to TDC...
General rule of thumb is 10 psi per 1000rpm.