Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Previous owner Had valve job done with hard seats and such he never drove it so heads only have about 5,000 miles so they need very little work {machinist checked and confirmed]. However he did not touch bottom end Rings and piston have 149,000 miles thats my guess for oil consumption, but still...
OK Bruzilla I do listen and thanks. Found out by machinist bottom end never been apart @149,690 miles, PO did valve job & seats on heads thats it. I was cruising 100mph 2 weeks ago used a quart of oil in 2 hundred miles. So final decision made by level heads not mine was too rebuild 383 with...
Bruzilla I will be the first to admit I aint right. I guess I would rather have it and not need it than need it and not have it. In a couple of years I probably give it to my son anyway [ 2.94 gets better mileage runs lower rpm] Thanks buddy
Hey Moper when I was younger I ran 180 mph with no motor at all but I did use a parachute to slow down. Maybe thats what messed me up. I know you understand LOL
Well .... talked to machinist his choice was 440 source he has had good luck with them. I gave him a choice of edelbrock or stealth heads he said he would do same work to both and he has been happy with stealth. So.... Going to get finals and price 438 with heads I told him if he says it fast...
Delta I live in the country Few stop signs and less red lights. Most of my driving will be hiway or country roads and normally 70 mph or more I don't waste time on the road and thanks for response
Darter6 thanks I guess my list just got shorter They sure have alot on the internet but just thinking if they closed or are closing I should go elsewhere. Nice car BTW
Monday i will sit and LISTEN to machinist. Which one or none he likes best. I looked at the 496 kits but the short piston skirts scare me. And in reality all I have to do is get to "package store" before 9pm being retired I have all day, but it's a long 10 miles back home. hahaha This is a...
1967 charger 383, 516 heads, 2.94 rear gear sent motor to machine shop Monday will go and decide on build. I do not race or go to car shows. But do not like to waste time driving. I am considering a stroker Mancini 432 kit, 440 source 438 kit, or high $$ muscle motors 450 kit. Will run stock...
My son loved disassembly at a very early age. When he was 5 I had to put the clothes dryer back together when I got home from work. So I bought him a real toolbox and we worked on stuff, Now at 18 finished High school he decided to go to Aeronautics and power plant school he wants to work on...
Good morning I have a well used 383 It would get warm at idle. I replaced stock 22"radiator with a Champion 26" inexpensive easy swap Then a mechanical fan no clutch 160 degree thermostat. Car runs 160 never over 175 I live in South Texas it is VERY hot out there. Fan is metal and heavy today my...
I run a 6 blade mechanical fan the big heavy steel fan. I was thinking about trying the MARADYNE TEXAS TWISTER it is a 12ounce nylon fan. I had some 165 KW diesel generators with plastic fans I ran them hard never had a failure. I know the diesel never saw 6000 rpm So what do you...
Hello Mr. threewood the brackets 69GTX builds are they bolt on or weld on. I would like to his setup Mine was way too simple I need something to do haha
Don't remember model # Champion 3 core 26" Give them a call they will send right one. I tried a 22" champion ran about 190 degrees called Champion said i would like something "cooler" They shipped 26" replacement NO EXTRA CHARGE I returned 22" can you believe that. Good people easy to work...
I had a 22" radiator replaced with a champion 26" radiator. Driver side hole lined up drilled 2 holes for passenger side very easy I run a mechanical fan no clutch stock plastic mopar shroud. South Texas hot as hell twice the humidity my 383 runs @ 160 degrees 170-175 in traffic. This was...