• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by relevance
  1. Charles Cook

    Hood grille fitment

    I think it will be less notable with the chrome put on.
  2. 65Bel

    Who Likes Black & White Photography?

    Mobilgas Service Station in Austin, Texas, c1955 . . .
  3. S

    Parked the 318 and now it died while driving

    If your alternator is working, the armature bearing cap on the rear of the alternator is magnetic.
  4. I

    Another hot idle thread

    To follow up: I completely drained the radiator and replaced the thermostat with a hi-flow 160 deg unit. I upped the primary and secondary jets in the vac secondary 750 cfm carb. I left the timing alon. I then refilled the radiator with the drained fluid as it was installed only two weeks and...
  5. M

    FOR SALE NOS Mopar Fram PCV Kit 1962-69 # 131,132

    Hello all, Found some more of these Fram PCV valve kits. Early manufacture as the package only shows application up to 1967, however they are used untill 1969. # 132 package shows all 6 cylinder and package #131 shower all 6 & 8 cylinder. They are exactly the same in style, length,contour and...
  6. T

    Hood grille fitment

    No. I just haven't put it on yet. I'm talking about the area out at the corners of the hood . See the big gap between the grille, makes it look like the grill is sag on the ends
  7. 33 IMP

    These Bracket Racers are Good (+ Pics)

    I feel sorry for the guy in the other lane, John. Run the number with an 8, and lose by that same.008. Ouch.
  8. I

    Another hot idle thread

    Thanks. I have ordered a speedway universal shroud to see if I can make that work. I have a 512” to go into it but due to circumstances beyond my control it will not go into the car until August
  9. Photon440

    Race gas vs AV gas

    Most private aircraft registration numbers start with an "N". The credit card machine likely won't know if you make a number up.
  10. YY1

    Differences between 1967 and 1968-later B-body armrests?

    66 and 67 Coronet 440 WH and 67 Belvedere II RH used the 9" pads in post 12 with a chrome base. I've had six of those unmolested. I've never had a 66 Bel II but logically it should have used the same.
  11. Charles Cook

    Hood grille fitment

    Are you missing the chrome strip on the hood? Here is a picture of my 70.
  12. QuickBpBp

    1970 gtx air grabber solenoid

    It's made to close the door once the ignition is turned off whether the switch is on or off... I don't know about the 70 harnesses compared to 71-2 so I don't want to give wrong info.
  13. 33 IMP

    Race gas vs AV gas

    I just use old 5 gallon race gas cans. I have at least twenty. They are CLEARLY gas cans, and the airport doesn't care....... but Sam's Club won't let me use em for gasoline, cause they are not listed in their little pamphlet of "acceptable" "fuel containers". Last time I was there I went to...
  14. ChipinAZ

    Race gas vs AV gas

    Here's a list of ethanol free gas stations in the U.S. Also lists the octane rating of the fuel they sell. Not sure how accurate it is, but the do seem to keep it up to date. https://www.pure-gas.org/
  15. J

    1970 gtx air grabber solenoid

    my air grabber solenoid has had the green wire removed and I am going to replace it. I am curious as to where to plug the wire in and what its purpose is. Another one of life's great mysteries. As always any assistance is appreciated. Joel
Back
Top