Search results for query: *

Unfortunately this happens a lot !

Dash and doors painted Making progress, dash blasted, painted along with doors.

I try to subscribe to the theory if can't say anything good, say nothing at all.....however don't go there! Two bad experiences and I know of others.

Thank you! Tell Mark Vogt I said hello!!

Any new Classic Industries discount codes?

Yes, it is the primary. Short on front!

Donny, well said. I have personally been to Taiwan where this panels are stamped and know the owners at AMD. If any one does a good job it is these guys I have a lot of detail and even pictures of the process in Taiwan. I also brought metal samples back of the steel for grade and content...

Magnes stated "I do filler on bare metal." This is NOT recommend by any paint or filler manufacturer except one. Ever coat has a product named Z grip, they state you can apply over bare metal. Fine print will reveal only under certain circumstances. I have talked directly with the...

carb plates have have been around for years and are a reliable method of hoisting the engine and trans. Granted the K member adds addition weight, reality is if done correctly, studs or bolts are measured for correct length and are fully engaged in the intake thread holes, tightened properly...

How I did it Below ow are the pictures of Ho I just completed mine. They are not in order but you get the idea. I place my k member on a padded furniture dolly and slid under the car. I then picked up the engine off the stand and lowered it through the engine bay. I then attached the k member...

Who can identify the correct trim rings for my 70 Bee with Rally wheels (road wheels)? Help is appreciated!

Pm sent

I have experience with both and multiple gear vendor units. GV makes a great product, the only complaint I have experienced and heard about is the abrupt shift into overdrive, it can be harsh almost like a bang. Manual 5 speeds are great, just more changes....ie pedals, hump in flood and...

Try AMK fasteners.

Two ways to assemble Don't take this wrong, but are you sure you assembled it correctly? I have done several of these and the shoes can be installed wrong. I have attached a shot from the '70 assembly manual I have. Hope this helps!

Welcome, I am new to the site also and am restoring a 70 bee

Sorry, no extra fenders. Hard to find from what I hear and not cheap either - - - Updated - - - Here are a few more to motivate you! Like you I gave had parts sitting for several years and simply re-focused my efforts, especially in winter

How I spent Christmas and New Years. Wet sanding, buffing, Engine installBuilding the Dana

Pricey...but when you need them???

When you say 9 volts, in that going into the coil? What is the voltage coming out of the coil going to the distributor?