Separate names with a comma.
No court, referee station. It’s a fix it ticket, like having your front windows tinted, remove the tint, pay for the “paperwork” and your done....
The police are not trained nor do they carry decibel meters, the law is subjective. So if you do get the ticket, you go to a referee station where...
If using studs, the number stud on both sides will need a 6 point nut and all others can use a 12 point.
Just curious as to why your using such a small tube then stepping up?
Try Mothers Mag & Aluminum polish.
This thread was started 2 years ago.
Copper gasket on the headers and aluminum on the collector.
I run stainless from the headers back, cause I got s smoking deal on a Magnaflow complete system. My buddy uses higher temp ceramic paint on his...
I’ll double check the part number, it’s possible that I ordered the wrong ones.
Had to heat the tubes and use a large socket to dimple them in order to clear the pitman arm, steering box and steering column. TTI says they...
TTI headers don’t fit a low deck A body worth a shit, 800 bucks just circled the drain.
Use studs if ya got aluminum heads!
The mufflers are too damn QUIET! Use better mufflers and you'll be pretty damn happy.
Ditch the factory linkage and hydraulic, any and all issues are gone! I have TTI's on my 383, fit great, but the coating is slightly better than...
Copper gasket.......I swear by it!
Get some TTI headers. Buy once, cry once!!
Now the aftermarket aluminum heads have blind exhaust bolt/stud holes that do not go into the water jacket......just some food for thought...
Except Mopar big blocks don't have coolant in the intake manifold.
My dad has the Magnaflow header back system on his 70' Challenger and it sounds soooo wicked, I bought one for my A body and made it fit.