Separate names with a comma.
Is it possible that my oil leak is coming from the fuel pump? I'm not talking about the gasket to the block but from around the pump housing....
You know I have the same symptoms on my six pack Challenger and I know it's not heat soak. I can start the car cold, only let it run for a few...
Wanted an A12, got this.
Thought you guys might enjoy this ad (not mine). Falls into Craigslist Gold to me....
No can do, car is still in winter storage. Maybe in a few weeks. Thanks for the invite.
Same here. Lived near Warren and Greenfield, cruised W.Chicago to Ford rd. Many a races in my Road Runner, now have a 440 six pack Challenger....
Well I got to ask, are you running vacuum advance and if so are you checking timing with the vacuum advance plugged? Assuming you're not the best...
So far no squeal but you know how that goes. Again, only when revving in neutral before and I'm not a fan of overtightening the belt.
Tried a 1.25" spacer and pulleys are not aligned so I put the 1.50" back in and snugged the belt tighter - thanks for the input.
Thanks for the tips. Bible says 1.25" but I measure mine at 1.50" and pulleys look really close to inline but angled so that's why I asked.
For big block what is the spacer length between the alternator and cylinder head on the upper long bolt for a non-ac car? Is it 1.25" or ? Getting...
If it dies when you put it in gear, I think you're on the right path. You do not have enough initial advance so advance it more (idle RPM's will...
Absolutely Rollmaster for me. Just make sure what you buy uses a IWIS chain.
By the way, that's my 70 Challenger restoration in that issue.
This works, soak cotton balls in peppermint oil and put the cotton balls in a cup in your garage.
50 year old choke coil spring, you bet it's detuned! And yes I did adjust to suit my application. Thanks for your input.
My heat riser is removed and my crossover is blocked and I have no issues with choke working properly. Just an FYI.
So I'll just share my experience that I had with the same problem - 'idle creep'. I pretty much did everything said so far in the above posts and...
I use this, works like magic! Spray on a rag or microfiber towel and rub the letters.
If you need to fill in then I use this.
You sure your choke is unloading off the fast idle cam (arrow pointing toward it)?