Separate names with a comma.
The black cast piece is an alternator mounting bracket. The holes on the flat part align with the side of the head. The long tube part holds the...
You want the one that says RUST not Top Coat. Top Coat is worthless over rust![ATTACH]
I have an original 70 camshaft, 3 bolt. so I can use standard lifters?
Was it just the 69 single bolt type that was low taper or all 69-71s?
Whatever you do, do not get a direct drive compressor. They are noisy as hell. Most belt driven are quiet.
Dont know what your budget is but take a look...
I would look for something that has 8-10 cfm@40psi if your looking to just paint. Air tools are another story. I would also invest in a decent...
Tried something similar, didnt work. Need something close to 6" across.
How do you prevent the small hose from kinking? Install a spring or is there a molded hose for this?[ATTACH]
I guess there's no duty cycle!
From Stan Weiss site:[ATTACH]
I think he has to understand this is not a race head! More of a stock replacement. I would agree the seats do need attention. I spent $450 to have...
Is it Ok to mount before the distribution block? I was told it could set off the warning light when the pressure is decreased.
Cork gasket with sealer on valve cover side only! I used Gasgacinch, works good on valve covers
Leave it on the drivers side and forget it!!
It brings up this question: How much sheet metal can be replaced without it being a rebody?? What was left original on the Phantom Cuda?...
I have to go with Kate Upton[ATTACH]
Thats a 350 horse motor......no HP and would have an "S" on bottom for special not "P" for premium
Yes 413, 426 and 440 all interchangeable.
I dont know what its called, but does anyone repo this part or have a good used one?[ATTACH]