• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 6

    1969 Sport Satellite - upgraded to a 440/727. What's a fair sales price?

    Most of it is original, some of it has been repainted. Funny thing, the car came from Glendale, AZ...near you!
  2. 6

    1969 Sport Satellite - upgraded to a 440/727. What's a fair sales price?

    Some of the car has been repainted, but most is original. I drove the Imperial with the 440 in it before it was pulled (they were demo-derby folks) and I believe the odometer had 90K or less if my memory is correct. But, I can't swear to that and the last thing I would want to do is have...
  3. 6

    1969 Sport Satellite - upgraded to a 440/727. What's a fair sales price?

    Some of it is original, but it's had some point work done by the prior owner.
  4. 6

    1969 Sport Satellite - upgraded to a 440/727. What's a fair sales price?

    Yes, I do like the side molding, it looks good and it came with the car. Thanks
  5. 6

    1969 Sport Satellite - upgraded to a 440/727. What's a fair sales price?

    Yes, my understanding is that it is the 350HP version, same torque but lower HP. Has 915 heads, just not the HP version.
  6. 6

    1969 Sport Satellite - upgraded to a 440/727. What's a fair sales price?

    I'm planning to sell my ’69 Sport Satellite and want to come up with a reasonable price, fair to both buyer and seller. Your thoughts? Thanks in advance. I’ve owned it for about 10 years and had a lot of work done (and spent a lot of $$$) during that time. I acquired it from the original...
  7. 6

    1968 318 engine + 904 transmission - what's it worth?

    When I pulled the 318/904 2V out of my '69 Sport Satellite, it was complete from carb to pan, everything. It ran fine, maybe 110K miles on it? I had it listed for sale forever and no one wanted it. It had all of the A/C components as well. I think for someone it would have been great, but I...
  8. 6

    69 sport satellite fender emblems

    That's what I was thinking. If at least two FBBO members came up with the same measurements, that'd be a good indication they were accurate.
  9. 6

    69 sport satellite fender emblems

    Agreed - Richard Ehrenberg should know. I have a '69 Sport Satellite and could provide photos (with a tape rule) if need be, but my fenders are installed. There are a few other '69 Sport Satellite owners on FBBO.
  10. 6

    where to find what my car is worth

    This site might help? https://www.collectorcarmarket.com/valuereport/prices/1965-dodge-coronet-value.html
  11. 6

    What's with Ham's at Easter?

    Boneless leg of lamb on the Pit Barrel Cooker this Easter Sunday! Ham or Prime Rib for Christmas. Lamb may not be as easy to get? But, once you've had a quality lamb roast cooked right, there's no going back ...
  12. 6

    Porting hp 440 manifolds

    Regarding the results of extrude honing on a near stock build, as part of the well known "440 Resto to Rad" article, they had their HP manifolds extrude honed. This is from the article: "The HP exhaust manifolds on the test 440 were a respectable design. As an upgrade, they were swapped for a...
  13. 6

    Caliper rubbing rotor

    I tried the original pads which fit with the old caliper and they too sat on the hub.
  14. 6

    Caliper rubbing rotor

    I wasn't aware that you could bend the tabs to make them fit - the driver's side is fine as it came from PST. Believe me, I sent multiple detailed pictures to both PST and their distributor - no one mentioned modifying the pads. Again, I am not a brake expert by any means, but I will look into...
  15. 6

    Caliper rubbing rotor

    This problem can occur even with brand new matching parts. I had (well still have) this issue with a replacement PST caliper (shown below). The original caliper failed and PST had their distributor send a replacement in 2020. As you can see, the pad is rubbing on the hub. Everything to do...
  16. 6

    2785434 and 2578715 fan shrouds (not perfect) - are they worth saving?

    Thank you for the input! Now I have a project and hope to learn something in the process. Will definitely start with fixing the small hole first. If they come out great, I will eventually post pics.
  17. 6

    2785434 and 2578715 fan shrouds (not perfect) - are they worth saving?

    I have two older 26" fan shrouds that I am not using, PNs 2785434 and 2578715. I acquired these several years ago. As you can see from the photos, they both have a small amount of damage; the 2578715 has a hold in the lower right side while the other had a piece of the edge or lip of the...
  18. 6

    383 stroker vs 440 stock rebuild

    I love these threads and always learn something new. So just to make this interesting, I have a bone stock 1967 350HP 440 (915 heads) from an Imperial currently in my '69 Sport Satellite that still runs great. I also have two complete (carb to pan) spare motors for an eventual engine swap if I...
  19. 6

    440/727 Parts Car vs Buying 440 Separately

    I couldn't have said it better myself. I acquired a complete "radiator to driveshaft" 440/727 from a '67 Imperial which I had transplanted into my '69 Sport Satellite. Coming from a C Body, the kickdown linkage was different, the 28" radiator was too wide, and there was a back-up light...
Back
Top