Separate names with a comma.
What would cause the cross shafts to break? Never seen this happen before. The rest of the unit looks ok short of normal wear....[ATTACH]
@Lefty71 posted a link to a question I had on t-stat housings that I thought were pretty informative and would like to share the info.....this is...
Been so freaking long since working on a small block that I freaking can't remember....plus Oldtimes is working it's way in too I guess.....plus...
And have them actually run quiet? The thought crossed my pea brain when I pulled a 3.55 pinion out of a chunk that had the diff missing. Probably...
Or is there a site that I can 'learnt' from? Would like to slam in some 3.90 gears or even 4.30's in my beater 95 Dakota V6 since I can't find a...
Seems finding Dana 60 shaft shims is a thing of the past but got to thinking, is it better to install them under the cup in the housing instead of...
Any reason why a late model 400 rod won't work in say a 66 383? I know the 383 used a forged crank and the 400 was cast so maybe there might be a...
Thinking that no one would want these since the pin fit is thin on one side.....? Hope the pic shows what I'm talking about.[ATTACH]
One is in 5 pieces and this one looks like it was on it's way. Looks to me like they are all in coil bind.....[ATTACH]
https://speedmaster79.com/driveline-and-systems/differential-rear-end-components/differential-carriers?page=2Didn't see anything for the 8 3/4...
Engine in question is based on a 400 block.Question #1.....do hydraulic lifters for a mild cam such as something around .480 to .500 lift vary...
I have a set of new but old steels with surface rust that you can feel and figuring they are junk or can they be cleaned up?? The clutches look...
Anyone else besides me do this? I've used them before and had good results in street cars. Got a 3.91 many years ago that had been sitting in a...
Been researching a Trac Lok carrier/differential based on the deck height and the only rear end that DH points to is an 80. I know these things...
Thought it was fairly interesting and might shine some light on things.[MEDIA]
What the heck is that?? First I heard a 4 speed had a dog bone.....
I'm no expert but have been doing gears for over 30 years and had some that went on pretty easily but you couldn't spin it once it was tapped on...
in my 97 2500 diesel! I know this is a truck but who here doesn't have one! Was having a bit of a rough time getting the differential out until I...
with the line still attached to the trans? Pan and filter are off the trans....
Need someone to tell me or post pics of what should be on a 69 road runner. And....this also has a 440 4 bbl in it instead of a 383. It also has a...
