Separate names with a comma.
My Charger was born with a 318/904 and from what I could tell used to have at least a 1/4” fuel vapor line running back from the right inner...
I went with the earlier complete tank after really thinking about putting a fuel cell in the trunk. Also tried to work out buying the “correct “...
Thank you for the kind words. I am happy to help you with information and potential problems that I have worked through with my Charger. This...
I went through a lot of stages trying to figure out how it would work before diving in. Once the decision was made then ordered the parts and put...
There are 4 vent tubes on the efi tank on the left rear side. I did not use any and just have a loose fitting “vented “old locking gas cap that I...
Looks like another reason to leave the hood off because you get tired of lifting it all the time to play with the carb.:steering::thumbsup:...
Standard size opening like any Edelbrock, TQ or Holley carburetor. I am looking into making an air duct and putting a cone filter inside the...
I have the lowest number it comes with and I have a fuel pressure gauge on the tbi inlet that consistently reads around 85 psi going in and the...
I went with an efi tank w/pump for 71-72 Charger and went right in my 74 Charger. Plays nice with sniper system.[ATTACH] [ATTACH] [ATTACH]...
I would agree that it seems like a large number of people are actually expecting these after market efi kits to be a simple days time to install...
I will definitely check the shaft and it’s a B 400. I am aware of some issues with the tip being short . Thank you for your help.
I think it’s a miss and it’s also intermittent or random may be a better description. My plan is to install the hyper spark distributor, cd box...
Wow this is a great thread for learning about tuning the Sniper system. I have installed new fuel tank with the pump and Sniper efi and just...
If you can get the tank drained it is pretty easy. Make sure you disconnect all the lines and lower it down with a jack. I just replaced my 74...
I hope this helps because I just went through the filler grommet issues with my Charger and this one actually works and gives enough to slide the...
Great day today, tank is in and fuel lines and filter are in, filler neck is centered under the license plate. I put the fittings on the tank...
The underside above the tank looks good and no rust or other ventilation that’s always good. I put some insulation on the top of the tank and...
I actually made good progress on the fuel tank today. The original is out on the ground and I was able to “test fit” the new tank and it’s...
I glanced at the papers for it and it looks like those are vents for OEM replacing so maybe just use 1 for the vent. Or maybe get a proper fuel...
I plan on starting on mine next week. We are also replacing our hot tub so I have been taking the deck down and preparing for the swap out which...
