Separate names with a comma.
I'm getting ready to clean up & re-seal the heads for my 440 and started scraping the VC gasket off. When I went to flip the head upside down to...
I picked up a running 19k mile 76' 440 out of an RV for next to nothing. I have several others, one of which is being built by a shop currently. I...
New or used. Must be un-milled. No repairs. No damaged threads. Include shipping to Ohio zip 44004. Whats out there? Thanks!
That is what my builder called for. Is it a good break in oil? It threw me off guard, as I was planning on grabbing some Driven break-in......
Here goes... A friends neighbor was cleaning up some property he inherited from his recently deceased parents and over the coarse of gathering up...
Hope this doesn't stir up any negativity... Just would like to ask for prayers or positive vibes. A very close friends wife got diagnosed with...
Spring cleaning my unfinished basement & started pulling things down from the hiding spots between the rafters. Found this box of old tubes. Some...
Hi guys. Im getting ready to weld in my outer wheelhouse and everything lines up except for the trunk extension. This section was heavily rotted &...
I yanked the air grabber bulge the other day to blast the hood and after getting everything disassembled, it looks as though it has all but 2 of...
Hi guys. I am replacing the quarters on my 71 & cut the majority of the panel off today. I noticed this strip of what I assume to be seam sealer...
Getting ready to mock up my 440/727 into my 71. Engine & trans will be bolted to the K & I'm curious if there's room enough to bolt on my headers...
I removed the braces from a 71 Satellite to replace one on a 73 RR. This was leftover. Mite fit 74, I'm not sure. Its original & has the part#...
Pulled these front spring mounts/hangers off a 73 RR for spares on my 71. Didnt realize till they were getting thrown in the blasting cabinet one...
Getting ready to pull the pin on the Mopar Performance black cast aluminum valve covers from Summit since I've got a $25 discount to use. Upon...
I finally pulled out a few things to sell so I can buy a few things I need & free up some needed space. One item I have is a very nice thumbwheel...
Rechromed by The Bumper Depot. Lowest priced I've seen in quite a while. Cant speak of quality, just figured I'd share......
I searched the forums this week & found nothing definitive as to my question... I have a 440 being built & am using 440Source stealth heads & also...
I need the can inside the rear drivers side wheel well. Mines full of pinholes.... Shipped to Ohio zip 44004. Shoot me a price.Unless anyone has...
O.k. guys & gals. I figured I'd throw this up for some of those who may know, or have expierience in this item. It is a green "gator" grain vinyl...
I am getting prepared to finish up my drip rails on my 71 Satty. With blocking complete, my plan is to scuff the valley of the drip rail where the...
