Separate names with a comma.
[ATTACH]
Merry Christmas Ragnar. Great Photo:thumbsup:
That's a bad condenser.
Looks like it did it's job :thumbsup:
This is where the paint shop needed to fix what they did. You shouldn't have had to sand it off again.Getting too much paint, needs to be...
This was just posted recently...https://www.forbbodiesonly.com/moparforum/threads/mini-starter-doesn%E2%80%99t-fit.204368/Also read all of the...
On the '66 and '67s it would need back halfed and large tubs to get a 12" under there.I've seen a couple with 60 series tires, the back end up...
Charger? They aren't pics of corvettes.
[ATTACH] [ATTACH]
I've seen a couple "West Coast" cars with tint and no AC. I even own one. You could order tint without having AC. I still get a kick out of a...
I had s 1964 Dodge that had dark tinting all the way around. Apparently there were four different levels of tint and you could order what you...
You should be able to take the headers loose from the heads enough to remove the heads. After removing the heads you should be able to take the...
https://www.detroitmuscletechnologies.com/mopar-b-body-66-67-belvedere-charger-coronet-body-bumper-set-bbk1/Plus Ebay is full of them. They even...
Welcome Chris!Great looking Charger, I like the stance, Cragars, wide tires on the rear and nice color :thumbsup:
Spectra makes a nice tank.https://www.summitracing.com/parts/sgt-cr14/year/1966/make/dodge/model/chargerTheir sending units are good also....
4 or 5 inches could be the spider gears turning before the driveshaft moves on a open rear. Leave one wheel on the ground and try it. Or have...
I'd go for it. It's what this site is all about, sharing what we've done to our cars and learning from others. Looks to me like you did a good...
I believe there are several YouTube videos on revamping the one piece headliners. The newer vehicles useing almost the same might give you some...
I had some confusion when installing the roof rail seal on my '62. Used the Softseal from Metro.If you have the type with two different profiles...
If it was done like on my '62, you use a 2" fire hose and shoot it everywhere, on everything! What a mess :lol: