Separate names with a comma.
Sorry must have read it wrong I will blame it on my age thing. LOL. So, forget that hey.
So the vent line in the trunk dose it go into the frame rail? My runner was leaking out the frame rail from my vent line. Had to vent the tank one...
Seems everyone has a problem with this. I bought a meter match. But pulled my sending unit out and had to bend it closer to the front of the tank...
Sorry no I have 5/16 fuel line's and now going to use 7/16 rubber line to connect the two lines together 5/16 to 5/16. Hope I cleared that up for...
New tank and sending unit. Thanks for all the comment's this is food for thought. I know I won't be buying any more fuel from the 7 eleven stores....
I got 3/8 rubber line to tie my 5/16 steel line together at fuel tank and fuel pump. When driving the car, I notice that small air bubbles are...
Ok ok. here is what I did. Got a brass female thread to male thread 90 degree fitting. Drilled a hole in the top of the filler neck between the...
OOPS. Sorry about that. Glad you put them on the right track. LOL.
Yes I get that no tanks made for lift. The car rides good with it loaded. Did not have to pull the rear down much to attach the shock's. Pulled...
Well solve one problem and another one pop's up. Just is frustrating car is finished and drive's well and run's even better. Know you guy's are...
Thanks guy's back to the drawing board. LOL.
I agree. Know I had this problem with a 73 charger and a 69 duster but been a long time sense I had to deal with this problem. What I get for...
I under stand that for sure. Was having a problem with the sending unit pick up tube also and had to bend it to the front of the tank and closer...
Ok the vent lines are correct and hooked to the proper ones on the tank. The vented cap may be the best Idea. Or put a vent on the filler neck....
Ok so have a 69 runner. Put 2 1/2 inch recurve spring's on the back to give the car that rake I wanted. Now have fuel leaking out of on of the...
650-700 cfm four barrel Holley is fine on a 383. 9.8 to 1 is what I am running. Plenty of pep. Running 80 jet's in it now it had 74 jetting on...
I am a Holley guy for my carb's. Simple to work on and have always been able to rebuild them. Part's are kind of pricey but you get what you pay...
Open up the air needle screw's a half turn. See what that dose. That should lean it up.
Looks rich to me. Should be a tan color.
Just wanted to say got the carb all lined out. Had bought new brass floats for this 650 carb. Put 80 jet's in. The secondary would flood or just...
