Separate names with a comma.
Testicles, spectacles, wallet, and keys!
I've straightened a few dents with a vice, and well as using a BFH. Not perfect, but better than what I started with!
That is a very lame example, of course! I've bent many a razor blade without it breaking all the time. I guess I know the trick to it and you don't?
I would use the same design that Mama Mopar used for your car. Good Luck
That makes the boat of us. Good Luck
I'm liking the table, did he build that too? What's the center post on that?
I've never had a switch be that problematic before, something surely wasn't right? Local O'Reilly's has it, AutoZone shows 2 part numbers but both...
Going to pick up a new switch here in a couple three hours! Mines to nasty to take pics, it's a grossly dirty unit!
Well that idea sure as hell didn't work, how'd it work out for you? After repeated frustrating attempts to get the shaft released from the switch,...
I've been doing everything, including that. My dam finger is numb from the button!
That's what I've been doing, it seems right before full on is when the tab will depress, I get nothing! I've tried various pressures on the...
I've been fiddle fartin around with this for the past hour trying everything. I can feel where it hits a point the tab with go down but then kinda...
I'm against this same problem with the button and trying to get the shaft out of a 69 A-100 with the exact same switch. The knobs aren't...
Don't put a new one in as everybody's suggesting, you've already done that! Put the old one back in and see what happens! Good Luck
Blame it on the Corona Virus!
The sooner you realize that everybody here is a expert, and that they treat everybody else as the idiot that don't know $h!t that they aren't,...
I just swap out those old heavyweight POS for a newer lightweight mini and never look back! Good Luck
Yesterday, today, and the day before were NOT the days to have a old car out. Don't you know there's a bunch of pebbles and fine gravel on the...
I went the SSBC route, never heard of leed. Good Luck
I know on my 66-300, I have to get to them by the grill. See where you can get your arm to go in that direction. Yours may have to get at from...