Separate names with a comma.
I found these NOS Erson Hydraulic lifters @ the swap meet but cant find this number anywhere. They look like they may have come out of the 70s or...
So I tore my motor down and am trying to order new mains and can't seem to locate this number any where on the web.. Clever MB1883M/ 1884M. Does...
So I posted a while back that my motor started making a hack of a racket, It only has about 30-45 minutes of idle/ reading time irn it. I pulled...
Have a chance to pick up a 493 stroker for a fair price, problem is with my heads it would be a paltry 9.2. I spent a good amount of time talking...
Well working on the car today and the motor started making a hell of a knocking sound. Took the dust shield off looking to see if anything was...
So installed my shifter yesterday, everything went relatively smooth with one exception. The neutral safety switch works in park, reverse neutral,...
Has anyone used this locker ( YGDl-60-3-35)? Pros/cons? Is it worth the additional $100 having a full forged housing vs cast steel (like power...
I have a big block 727 that I bought and had rebuilt, bought a Speedmaster billet yoke, verified shaft was 29/30 spline. Had to push and wiggle...
Can anyone tell me if there is a 727 w/30 splines ever come with a keyed spline on the output shaft? I purchased a billet steel shaft yoke with...
Does anyone know what length drive shaft a 67 Coronet w/a 727 & Dana? It's Sunday & too dang hot and late in the day to go to the shop to...
So I bought Hayden trans cooler with a fan. The line size is a 9/16 flare, I have 4an fitting in my case, would there be any issues with changing...
So I have a dumb question, when setting up my clearances Comp says that I need .030, is that for each set of rockers between pedestals (total),...
Im having a friend rebuild my trans as I still beleive that are controlled by black majic and a sprinkle of vodoo, that will be installed in my...
So I was mocking up my motor this weekend and noticed that some of the coolant passages were partially/totally blocked. Is the slit normal, and...
Have a question which way offers the best cooling for a trans....using a factory trans cooler in the radiator or a remote unit with a fan? Will...
So I'm almost to the point of putting my motor together (heads really)... I have a Hughes hydraulic roller and have a couple of questions as I'm...
Has anyone ever seen a I beam type con-rod marked with a PK on the side of the big end? Press fit pins., no markings in the side of the rod... Thanks
So I have a lead on a partial build 512 but am having trouble getting some answers and wanted to know what you all thought. 400 block, " all...
Im confused here, Milodon has two shafts listed one is 8.5 long (21520) & one that is 8.187 long (21523), both listed as for a RB??? Can someone...
Need some help guys..this isn't a Mopar but it's preventing me from working on my Mopar and tying up our lift....hoping someone can shed some...
