Search results for query: *

Hello! Welcome!

Later 70’s Cordoba or other B-Bodies, maybe 500 or so. If the tracks are correct for 68-70 that is where the value is.

Nice! Did it a couple years ago with the real thing.

Welcome!

Yes, should have been clearer.

The one clip snugs it against the headliner and the rear, bottom, and front edges are held in by the window trim, rear panel, and SE louvers.

The gearsets are all 18 spline but can be used in a 23 or 18 spline transmission. Final ratio is .80 to 1

I bought the OD gearset from Passon for my 70. With all the required parts plus syncros, bearings and seals i will have OD for right at 3k.

The metal ones are forward of the wheels and available as well. Mopar B Body 66-70 Steel Inner Fender Access Covers Splash Shields with Screws

It is a splash shield that goes there. https://www.detroitmuscletechnologies.com/mopar-b-body-66-70-engine-well-splash-shields/

:bday: :bday: :bday: :drinks: :drinks: :thumbsup:

Power steering column in a manual steering car? They are shorter. Could also be collapsed. Will the lower shaft slide towards the gearbox when the slots are lined up under the dash?

Highly recommended

Nice! Welcome! Would be a great driver as is!

Finished the HVAC box and got it installed. Had to modify an L bracket to secure the heater core and the Heat/Air flap had a section busted out. Used a fender washer rivited to the case to secure it and sealed the rest of the hole with AC wrap tape.

Been using Pirate Ship for a few years, If you have larger items or even freight ShipNex is good too.

Sweet car! Congrats on a nice purchase! Any close up pics of the hubcaps? I have a set for my 66 I want to refinish.

Yes. They are mandrel bent to fit correctly.

The original hangers are natural, Accurate sells the correct ones. I clear coat mine so they stay looking good. I am going with TTI for my exhaust as they have a correct 2-1/2 all the way back with tips at damn near half the cost of Accurate. Their hangers are ugly though so go elsewhere for those.

Still no pics, we would help if you tried.