Search results

Lots of **** going around these days.. More than likely a legit illness I would file in a few days just to make sure you don't get screwed that gives him 5 more days to provide shipping information..

Sounds like it's losing a ground.. Make sure that battery terminals are tight it could be that simple..

I have 67 charger fender “tips” with the turn signals in them.. Close to what you need?

Anything is possible and I only had one '67 Charger which was an console Auto. I would pull up the carpet and see what is on the trans tunnel that should tell you whether it came that way and's not a lot of time to invest...

I understand what your saying I am only saying Early 67 B-body used 2 piece consoles. I had a few of them they have bolt on console ends and are not one piece. They look just like the later ones but are not the same as the one piece. I have 2 piece one still it's a 4 speed one from a 67 GTX and...

Actually they were still a 2 piece design just shorter with a bolt on console end. Also a much heavier material not the thinner later ABS plastic...

Pm sent..

I have a whole rear set in good used condition $200 plus shipping if you can't find pieces..

I don't believe the Cleaner Air Package was California only....

Both are CAP just from different models...

CAP has a hose nipple for a hose to breather and NON Cap has no nipple on air cleaner....

I have a bunch of Air Cleaners. This is an original wrinkle finish Dual Snorkel air cleaner from a 67 R/T.... I believe this unsilenced air cleaner also came on some 67 B-bodies and is an original wrinkle finish from a 67 383 Barracuda..

They make the 67 Charger Fender T/S assemblies if that is what you are talking about... https://moparplus.com/252-ch67-mopar-1967-dodge-charger-fender-mounted-turn-signal-indicator/

Anyone know what a nice 66 auto top plate with the EL shift light is worth since people are talking about them in this post?

I know they switched to a short style console in 67 instead of the long one used in 66. Thanks for the info on the lamp being 66 only.

Thanks I looked and did not see one with EL shifter light or one with the aluminum insert only the ribbed style not used in 66-7 Chargers.... Otherwise with-out it, it is the same as used on some c-bodies.... Do you have any links to one with it? I did not find any...

Don't know a lot about 66-7 Chargers. Just a question to ask if the Auto console top plate with the luminescent light has any value. I have a nice one but I see none offered to base a value on...Also I assume 67 is the same top plate with the lighting... Thanks in advance.

^^:popcorn: Anyway keep in mind 66 is different than 67 on the fenders as 67 had front fender turn signals....

EL as in Electroluminescence? Thanks for the info!!

Is this console harness 66 Charger only or 67 short console with the armrest? Has a newer part # and the switch for the inner glove box lamp. I also have the lamp lens but not pictured.. Has part #2822415. Thanks in advance!