Search results

There was an adapter that came with the kit for 3 to 2 prongs. Same bulbs.

Amazon https://www.amazon.com/gp/aw/d/B000NZUQ56?psc=1&ref=ppx_pop_mob_b_asin_title

Exactly what I installed in my GTX. Plug and play. Then kept the bulbs and went with stock looking lenses. Easy install.

I’m in Bullhead, so we are neighbors! Maybe I will look into a factory shroud and mechanical fan after I finish having it tuned. Thanks

I have a brand new cold case 26” aluminum radiator with dual 12” electric fans with shroud. New hoses, water pump, 185* thermostat. Straight distilled water with Royal Purple Water Wetter. Aluminum heads on a 426 hemi and 6-71 supercharger. Driving for 15 minutes at 9am in Hell (Arizona) it got...

Shoot! Sorry. It’s for a 68 GTX. It’s chrome rocker switch. Is that regular or rallye?

Looking for a 3 speed wiper switch for 68 GTX. I have everything else hooked up, but doesn’t work with the 2 speed switch. Thanks

Octane Lighting. Plug and play

I have the Sniper Stealth on my Hemi GTX. I’m running a 120 amp 1 wire alternator. The 3 wire one running through the bulkhead connector started melting wires. I installed the Dakota Digital RTX gauges after that and eliminated the amp gauge and wiring. No problems so far.

Looks like it is custom. Welded bracket and possibly upside down. Pop it open and see what, if anything, comes out.

It was what I could come up with to grab your attention and read the thread

Exactly! It’s cool now, but would possibly like to add A/C, power steering, power brakes later on down the road. Not much room with the elephant.

I would have to change out the low compression pistons, but definitely a possibility. Thanks

I have a 68 GTX with a Weiand 6-71 blown 426 Hemi. Only 40 miles since being rebuilt. It is a 68 block with Stage V aluminum heads, Arias forged blower pistons. Everything is either new or rebuilt original parts. My question is, if I get tired of trying to see around the blower, how much could...

God Bless America!

I may try this. I did a full center console for a Camaro and turned out nice. Time to order more parts for the cardboard!!

That looks nice! Just what I was looking for.

Anyone fab up a filler panel to cover between the grille support and radiator core support for a 68 GTX? I would like to smooth out the looks in this area. I suck at fabricating, but can make a mean cardboard template!!

Thanks. I will give that a try. They are Stage V aluminum heads with 20 miles on them. Do I need to remove the copper o-rings and replace them, or can they be reused like the copper head gasket? My plan is a little silicon around the return holes and button it back up. Is there any easy way to...