Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
And they don't get any smarter. (North Carolina)
People caught on video trying to pull bear cubs from tree to take selfies
People caught on video trying to pull bear cubs from tree to take selfies - National | Globalnews.ca
I'd have to check the FMS again but I didn't even torque mine that much. I was feeling the pucker factor kicking in and chickened out.
Edit...
I checked and it's 10 inch lbs. The reason I had to remove my park housing is because I broke the clamp bolt making the park cable adjustment. It only...
That's the clamp bolt that holds the cable in place. You just loosen the nut but not all the way. Gently tap it at the threaded end to move it. You'll feel the cable loosen up. You don't remove it. Also when reinstalling the cable you don't want to over tighten it. It will snap. I believe it's...
Here's the rear band shaft that was mentioned.
I'd get it real clean with parts cleaner then puff some baby powder all over everything and watch where it's coming from. Might save you more work if it's only the gasket or cable o-ring. Still involved to remove the cable and housing. There's a...
I didn't even mark the nut. After replacing the seal I used some Teflon paste on the splines and a little oil on the seal and contact area on the yoke. Installed the yoke, washer and nut. Tighten till it bottomed out and turned the yoke to seat the bearings. (Maybe didn't need to do that part) A...